[Sun Jun 23 06:18:18 2013] Detection parameters:
  Position = (258.9, 288.1) = 4 56 10.17 30 31 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.0 +/- 21.0
  Background counts = 162.5
  Rate = 0.002 +/- 0.0003

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 2.96'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 7.91"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sun Jun 23 08:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Source 45 is offset by -7.387321 and -4.835883 pixels which is larger than
2 X fitted extent = 0.909292 x 0.909292, not incorporating fit results
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 7.91"
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun Jun 23 14:01:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Spatial fit model total counts = 1260.540000, observed total counts = 1122.000000
[Sun Jun 23 17:20:43 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 17:20:43 2013] Source 45 is offset by -4.826240 and 2.338738 pixels which is larger than
2 X fitted extent = 1.214156 x 1.214156, not incorporating fit results
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:14 2013] XMMSAS src. selection expression = ellipse(22474.671082, 25012.024170, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_src.reg
[Sun Jun 23 17:21:14 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (221, 251) - (296, 326)
[Sun Jun 23 17:21:14 2013] XMMSAS bgd. selection expression = annulus(22474.671082, 25012.024170, 1087.500000, 2175.000000, X, Y) && !ellipse(25241.893200, 28183.253000, 1337.236838, 1337.236838, 0.000000, X, Y) && !ellipse(24704.436371, 24526.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.051666, 22557.006195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.077759, 23523.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25058.471252, 26062.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.111816, 25366.868835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.034400, 23922.284800, 1316.688038, 373.419211, 65.049000, X, Y) && !ellipse(24956.730530, 23881.733063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22210.840820, 23689.936401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.441559, 23475.752533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.294708, 23018.697205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.581299, 22689.170898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.694702, 22152.454071, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45.gif
[Sun Jun 23 18:17:40 2013] Mean detx,y = (-4448.77, 2593.21) 
[Sun Jun 23 18:17:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:17:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:18:00 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Jun 23 18:18:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun Jun 23 19:29:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 19:29:28 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:17 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:17 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 853.00
[Sun Jun 23 22:10:17 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 3783.00
[Sun Jun 23 22:10:17 2013] Got source and background scale factors 1289464.000000, 6632435.000000
[Sun Jun 23 22:10:17 2013] User source parameters:
  Position = (258.9, 288.1) = 4 56 10.17 30 31 25.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 117.5 +/- 30.2
  Background aperture counts = 735.5
  Rate = 0.001 +/- 0.0003

[Sun Jun 23 22:10:17 2013] Updating counts from extracted products
[Sun Jun 23 22:10:17 2013] Set source signif. to 117.52/27.12 = 4.33
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=0.00131, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 6.9e-15
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete