[Sun Jun 23 06:18:18 2013] Detection parameters:
  Position = (277.6, 323.2) = 4 56 3.88 30 33 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.2 +/- 22.6
  Background counts = 159.8
  Rate = 0.001 +/- 0.0003

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 2.35'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 7.60"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun Jun 23 08:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Source 39 is offset by -5.422716 and 3.222912 pixels which is larger than
2 X fitted extent = 2.184547 x 2.184547, not incorporating fit results
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 7.60"
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 23 14:01:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Source 39 is offset by -1.133477 and 6.161073 pixels which is larger than
2 X fitted extent = 0.873720 x 0.873720, not incorporating fit results
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:14 2013] XMMSAS src. selection expression = ellipse(24101.221680, 28067.405334, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_src.reg
[Sun Jun 23 17:21:14 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (240, 286) - (315, 361)
[Sun Jun 23 17:21:14 2013] XMMSAS bgd. selection expression = annulus(24101.221680, 28067.405334, 1087.500000, 2175.000000, X, Y) && !ellipse(25241.893200, 28183.253000, 1337.236838, 1337.236838, 0.000000, X, Y) && !ellipse(23961.296326, 28972.446411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25058.471252, 26062.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.111816, 25366.868835, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39.gif
[Sun Jun 23 18:11:24 2013] Mean detx,y = (-2870.60, -533.15) 
[Sun Jun 23 18:11:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:11:57 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:11:57 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jun 23 18:11:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun 23 19:24:33 2013] Not generating rmf since there are only 97 counts
[Sun Jun 23 19:24:33 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:16 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:16 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 1496.00
[Sun Jun 23 22:10:16 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 3066.00
[Sun Jun 23 22:10:16 2013] Got source and background scale factors 1172108.000000, 4981691.000000
[Sun Jun 23 22:10:16 2013] User source parameters:
  Position = (277.6, 323.2) = 4 56 3.88 30 33 56.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 774.6 +/- 39.7
  Background aperture counts = 721.4
  Rate = 0.009 +/- 0.0004

[Sun Jun 23 22:10:16 2013] Updating counts from extracted products
[Sun Jun 23 22:10:16 2013] Set source signif. to 774.62/26.86 = 28.84
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=0.00864, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 4.2e-14
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete