[Sun Jun 23 06:18:17 2013] Detection parameters:
  Position = (341.3, 318.0) = 4 55 42.43 30 33 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 661.6 +/- 35.6
  Background counts = 158.0
  Rate = 0.008 +/- 0.0004

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 3.41'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.14"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun 23 08:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Warning, spatial fit 21 centroid is now closest to src. 2
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.14"
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21.csv
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21.csv
[Sun Jun 23 14:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Source 22 is offset by 7.763482 and 6.203249 pixels which is larger than
2 X fitted extent = 1.716667 x 1.716667, not incorporating fit results
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:13 2013] XMMSAS src. selection expression = ellipse(29643.074951, 27615.370667, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun 23 17:21:13 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (304, 280) - (379, 355)
[Sun Jun 23 17:21:13 2013] XMMSAS bgd. selection expression = annulus(29643.074951, 27615.370667, 1087.500000, 2175.000000, X, Y) && !ellipse(28743.110400, 27039.521400, 410.808812, 410.808812, 0.000000, X, Y) && !ellipse(28300.216888, 28844.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.926600, 25562.496000, 468.834264, 468.834264, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22.gif
[Sun Jun 23 17:53:50 2013] Mean detx,y = (2513.87, -404.92) 
[Sun Jun 23 17:53:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 17:54:22 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 17:54:23 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 23 17:54:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun 23 19:05:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 19:05:49 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:12 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:12 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1256.00
[Sun Jun 23 22:10:12 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 4916.00
[Sun Jun 23 22:10:12 2013] Got source and background scale factors 1194490.000000, 7720735.000000
[Sun Jun 23 22:10:12 2013] User source parameters:
  Position = (341.3, 318.0) = 4 55 42.43 30 33 32.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 495.4 +/- 36.5
  Background aperture counts = 760.6
  Rate = 0.006 +/- 0.0004

[Sun Jun 23 22:10:12 2013] Updating counts from extracted products
[Sun Jun 23 22:10:12 2013] Set source signif. to 495.44/27.58 = 17.96
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=0.00552, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 2.1e-14
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete