[Sun Jun 23 06:18:17 2013] Detection parameters:
  Position = (281.0, 153.2) = 4 56 2.71 30 21 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.3 +/- 28.1
  Background counts = 137.1
  Rate = 0.004 +/- 0.0003

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 10.61'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Sun Jun 23 06:25:18 2013] source mask rpix=2.7, npix_max = 40, mask sum = 26, frac = 0.636
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.73"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Jun 23 08:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Warning, spatial fit 13 centroid is now closest to src. 15
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:05 2013] Source is confused with source 15
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Sun Jun 23 12:04:36 2013] source mask rpix=2.7, npix_max = 40, mask sum = 26, frac = 0.636
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.73"
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13.csv
[Sun Jun 23 14:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Spatial fit model total counts = 2727.890000, observed total counts = 1399.000000
[Sun Jun 23 17:20:43 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:13 2013] XMMSAS src. selection expression = ellipse(24401.991364, 13278.800552, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun 23 17:21:13 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (244, 116) - (319, 191)
[Sun Jun 23 17:21:13 2013] XMMSAS bgd. selection expression = annulus(24401.991364, 13278.800552, 1087.500000, 2175.000000, X, Y) && !ellipse(25048.875977, 13239.212738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.207550, 13321.018173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.698822, 14111.590317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.283844, 14479.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.185394, 13929.995605, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14.gif
[Sun Jun 23 17:45:05 2013] Mean detx,y = (-1725.61, 14079.65) 
[Sun Jun 23 17:45:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 17:45:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 17:45:34 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 23 17:45:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 23 18:59:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 18:59:18 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:10 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:10 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1012.00
[Sun Jun 23 22:10:10 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1393.00
[Sun Jun 23 22:10:10 2013] Got source and background scale factors 602962.000000, 582828.000000
[Sun Jun 23 22:10:10 2013] User source parameters:
  Position = (281.0, 153.2) = 4 56 2.71 30 21 31.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -429.1 +/- 32.8
  Background aperture counts = 1441.1
  Rate = -0.005 +/- 0.0004

[Sun Jun 23 22:10:10 2013] Updating counts from extracted products
[Sun Jun 23 22:10:10 2013] Set source signif. to -429.12/37.96 = -11.30
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=-0.00478, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updated flux is not positive, keeping original flux
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete