[Sun Jun 23 06:18:17 2013] Detection parameters:
  Position = (290.9, 324.1) = 4 55 59.41 30 34 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43208.6 +/- 237.2
  Background counts = 159.3
  Rate = 0.6 +/- 0.004

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 1.94'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.619
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.40"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 23 08:27:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 23 08:27:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Spatial fit model total counts = 39420.700000, observed total counts = 35076.000000
[Sun Jun 23 12:04:05 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.619
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.40"
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 14:01:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 14:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 14:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 14:01:23 2013] Fit fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 23 17:20:43 2013] Spatial fit model total counts = 36536.900000, observed total counts = 35076.000000
[Sun Jun 23 17:20:43 2013] Offset between fit and detection position for source 1 = 0.415555 pixels
[Sun Jun 23 17:20:43 2013] 36973.020000 total counts/ 3740.420000 bgd. counts: snr = 543.380608
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.415555 pixels
  Position = (290.7, 324.5) = 4 55 59.47 30 34 1.6
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 33232.6 +/- 192.3
  Background counts = 3740.4
  Rate = 0.4 +/- 0.002
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:13 2013] Counts = 33232.600000, rescaling region sizes by 3.000000
[Sun Jun 23 17:21:13 2013] XMMSAS src. selection expression = ellipse(25241.893200, 28183.253000, 1002.927629, 1002.927629, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 17:21:13 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (233, 267) - (348, 382)
[Sun Jun 23 17:21:13 2013] XMMSAS bgd. selection expression = annulus(25241.893200, 28183.253000, 5014.638144, 10029.276289, X, Y) && !ellipse(28743.110400, 27039.521400, 410.808812, 410.808812, 0.000000, X, Y) && !ellipse(26100.830200, 30965.255600, 463.227213, 395.492011, 320.501490, X, Y) && !ellipse(23961.296326, 28972.446411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24704.436371, 24526.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26628.684784, 22308.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.698000, 21096.468600, 468.689613, 370.480811, 338.528204, X, Y) && !ellipse(34695.428600, 33097.354800, 511.276815, 377.989611, 43.019400, X, Y) && !ellipse(32372.893768, 23365.170563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.051666, 22557.006195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.162600, 36212.776800, 488.701614, 338.639210, 348.084911, X, Y) && !ellipse(34879.594543, 34056.235443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16889.595261, 30946.768677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18706.665451, 29316.198364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29643.074951, 27615.370667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28132.328720, 23679.103600, 486.278414, 376.749611, 26.179659, X, Y) && !ellipse(23744.077759, 23523.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.287788, 20829.931000, 478.780014, 356.608810, 23.046359, X, Y) && !ellipse(17581.337921, 38799.548828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.158783, 36550.433685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.016388, 34248.515320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24157.845490, 33977.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20483.983215, 32966.773376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.216888, 28844.694366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.221680, 28067.405334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.574295, 27809.612610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25058.471252, 26062.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.926600, 25562.496000, 468.834264, 468.834264, 0.000000, X, Y) && !ellipse(25085.111816, 25366.868835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22474.671082, 25012.024170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.094400, 24450.808200, 477.105614, 278.604808, 346.645500, X, Y) && !ellipse(22108.034400, 23922.284800, 1316.688038, 373.419211, 65.049000, X, Y) && !ellipse(24956.730530, 23881.733063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22210.840820, 23689.936401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26410.388140, 23510.261840, 325.577609, 325.577609, 0.000000, X, Y) && !ellipse(19888.441559, 23475.752533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.294708, 23018.697205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.581299, 22689.170898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.694702, 22152.454071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.241913, 21273.239792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.183533, 20621.755341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34522.017853, 20522.879395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32408.775020, 19553.906400, 385.865611, 385.865611, 0.000000, X, Y) && !ellipse(20722.522000, 19591.358600, 652.414419, 237.825607, 50.165033, X, Y) && !ellipse(24694.349915, 19177.388870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27099.890560, 18729.166200, 418.990412, 418.990412, 0.000000, X, Y)
[Sun Jun 23 17:21:13 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 17:22:07 2013] Mean detx,y = (-1831.66, -721.47) 
[Sun Jun 23 17:22:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 17:25:30 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 17:25:30 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 17:25:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 22:10:07 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:07 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 36812.00
[Sun Jun 23 22:10:07 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 94659.00
[Sun Jun 23 22:10:07 2013] Got source and background scale factors 2202912.000000, 175728786.000000
[Sun Jun 23 22:10:08 2013] User source parameters:
  Position = (290.7, 324.5) = 4 55 59.47 30 34 1.6
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source aperture counts = 35625.4 +/- 192.9
  Background aperture counts = 1186.6
  Rate = 0.4 +/- 0.002

[Sun Jun 23 22:10:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:21 2013] Using photon index=1.80, rate=0.371, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 22:10:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 2.3e-12
[Sun Jun 23 22:10:57 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete