[Sun Jun 23 06:19:19 2013] Detection parameters:
  Position = (331.4, 127.1) = 4 55 45.77 30 19 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 17.5
  Background counts = 31.8
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 06:19:19 2013] Off-axis axis estimate = 12.65'
[Sun Jun 23 09:33:29 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:33:29 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Jun 23 09:33:29 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.040
[Sun Jun 23 09:33:29 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 12.75"
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33.csv
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33.csv
[Sun Jun 23 12:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jun 23 12:03:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:21 2013] Warning, spatial fit 33 centroid is now closest to src. 1
[Sun Jun 23 12:04:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:21 2013] Assessing source extent using major
[Sun Jun 23 12:04:21 2013] Source does appear to be extended
[Sun Jun 23 12:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:21 2013] Source is confused with source 1
[Sun Jun 23 14:57:00 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:57:00 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Jun 23 14:57:00 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.040
[Sun Jun 23 14:57:00 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 12.75"
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32.csv
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32.csv
[Sun Jun 23 17:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Jun 23 17:20:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:58 2013] Warning, spatial fit 32 centroid is now closest to src. 1
[Sun Jun 23 17:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:58 2013] Assessing source extent using major
[Sun Jun 23 17:20:58 2013] Source does appear to be extended
[Sun Jun 23 17:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 20:49:47 2013] XMMSAS src. selection expression = ellipse(28786.254517, 11008.314415, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing source region out to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_src.reg
[Sun Jun 23 20:49:47 2013] Extracting stamp from image fullrun_mos2_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (294, 90) - (369, 165)
[Sun Jun 23 20:49:47 2013] XMMSAS bgd. selection expression = annulus(28786.254517, 11008.314415, 1087.500000, 2175.000000, X, Y) && !ellipse(27772.316000, 11633.418000, 1745.288050, 841.472024, 18.904600, X, Y) && !ellipse(26872.630000, 11896.242000, 830.528024, 830.528024, 0.000000, X, Y) && !ellipse(26449.576508, 11454.288315, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52.gif
[Sun Jun 23 21:03:48 2013] Mean detx,y = (-2537.31, -16120.80) 
[Sun Jun 23 21:03:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 21:04:06 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 21:04:07 2013] Setting source spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jun 23 21:04:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Jun 23 21:59:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 21:59:10 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:33 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:33 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 853.00
[Sun Jun 23 22:10:33 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_bgd.pi.gz = 1126.00
[Sun Jun 23 22:10:34 2013] Got source and background scale factors 1246904.000000, 4699004.000000
[Sun Jun 23 22:10:34 2013] User source parameters:
  Position = (331.4, 127.1) = 4 55 45.77 30 19 38.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 554.2 +/- 30.2
  Background aperture counts = 298.8
  Rate = 0.006 +/- 0.0003

[Sun Jun 23 22:10:34 2013] Updating counts from extracted products
[Sun Jun 23 22:10:34 2013] Set source signif. to 554.21/17.29 = 32.06
[Sun Jun 23 22:10:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:36 2013] Using photon index=1.80, rate=0.0057, arf fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52.arf
[Sun Jun 23 22:10:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:36 2013] Updating source flux to 1.9e-13
[Sun Jun 23 22:10:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:10:57 2013] xmm0671960101/analysis//spectral/fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete