[Sun Jun 23 06:19:19 2013] Detection parameters: Position = (281.2, 138.3) = 4 56 2.65 30 20 26.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 70.0 +/- 14.6 Background counts = 32.8 Rate = 0.0007 +/- 0.0001 [Sun Jun 23 06:19:19 2013] Off-axis axis estimate = 11.67' [Sun Jun 23 09:33:29 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting [Sun Jun 23 09:33:29 2013] Initial guess for spatial extent in simple fitting = 12.27" [Sun Jun 23 09:33:29 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112 [Sun Jun 23 09:33:29 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 12.27" [Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src46.ximg exists [Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src46_1.ximg exists [Sun Jun 23 12:03:53 2013] Fit fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src46 appears to have run properly [Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists [Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists [Sun Jun 23 12:03:54 2013] Fit fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly [Sun Jun 23 12:04:21 2013] Warning, spatial fit 46 centroid is now closest to src. 2 [Sun Jun 23 12:04:21 2013] Source 50 is offset by 1.695215 and -6.823453 pixels which is larger than 2 X fitted extent = 6.793150 x 6.793150, not incorporating fit results [Sun Jun 23 12:04:21 2013] Vigneting correction estimate = 1.000000 [Sun Jun 23 12:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 23 12:04:21 2013] Assessing source extent using major [Sun Jun 23 12:04:21 2013] Source does appear to be extended [Sun Jun 23 12:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 23 12:04:21 2013] Source is confused with source 2 [Sun Jun 23 14:57:00 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting [Sun Jun 23 14:57:00 2013] Initial guess for spatial extent in simple fitting = 12.27" [Sun Jun 23 14:57:00 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112 [Sun Jun 23 14:57:00 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 12.27" [Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43.ximg exists [Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43.csv [Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43_1.ximg exists [Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43.csv [Sun Jun 23 17:20:30 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists [Sun Jun 23 17:20:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43.csv [Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists [Sun Jun 23 17:20:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43.csv [Sun Jun 23 17:20:30 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 23 17:20:58 2013] Warning, spatial fit 43 centroid is now closest to src. 47 [Sun Jun 23 17:20:58 2013] Spatial fit model total counts = 771.466000, observed total counts = 771.000000 [Sun Jun 23 17:20:58 2013] Offset between fit and detection position for source 50 = 7.094224 pixels [Sun Jun 23 17:20:58 2013] Warning, changing simple spatial fit ID from 43 to 47 [Sun Jun 23 17:20:58 2013] 776.705000 total counts/ 595.651000 bgd. counts: snr = 7.418433 Spatial fit parameters: Offset between fit and detection position for source 50 = 7.094224 pixels Position = (279.5, 145.2) = 4 56 3.23 30 21 1.7 Extent = 15.1 (10.9-18.9)", rotation angle = 0 Source counts = 181.1 +/- 27.9 Background counts = 595.7 Rate = 0.002 +/- 0.0003 [Sun Jun 23 17:20:58 2013] Vigneting correction estimate = 1.000000 [Sun Jun 23 17:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 23 17:20:58 2013] Assessing source extent using major axis lower bound [Sun Jun 23 17:20:58 2013] Source does appear to be extended [Sun Jun 23 17:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 23 20:49:47 2013] XMMSAS src. selection expression = ellipse(24267.516000, 12585.962000, 904.998026, 904.998026, 0.000000, X, Y) [Sun Jun 23 20:49:47 2013] Writing source region out to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_src.reg [Sun Jun 23 20:49:47 2013] Extracting stamp from image fullrun_mos2_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (227, 93) - (332, 197) [Sun Jun 23 20:49:47 2013] XMMSAS bgd. selection expression = annulus(24267.516000, 12585.962000, 1508.330043, 3016.660087, X, Y) && !ellipse(27772.316000, 11633.418000, 1745.288050, 841.472024, 18.904600, X, Y) && !ellipse(24506.673000, 12589.655000, 614.740018, 259.371207, 11.159300, X, Y) && !ellipse(26872.630000, 11896.242000, 830.528024, 830.528024, 0.000000, X, Y) && !ellipse(21049.366394, 14326.058273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23471.740000, 12022.647800, 1976.888057, 247.110407, 329.006100, X, Y) && !ellipse(26449.576508, 11454.288315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23316.556976, 12905.491486, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 23 20:49:47 2013] Writing fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50.gif [Sun Jun 23 21:08:33 2013] Mean detx,y = (1719.72, -15012.39) [Sun Jun 23 21:08:34 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 23 21:08:58 2013] Binned source spectrum to 10 counts/bin [Sun Jun 23 21:08:58 2013] Setting source spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Sun Jun 23 21:08:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_bgd.pi.gz [Sun Jun 23 22:10:35 2013] Updating aperture counts using extracted products [Sun Jun 23 22:10:35 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 6849.00 [Sun Jun 23 22:10:35 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_bgd.pi.gz = 2907.00 [Sun Jun 23 22:10:35 2013] Got source and background scale factors 2346920.000000, 15342706.000000 [Sun Jun 23 22:10:35 2013] User source parameters: Position = (279.5, 145.2) = 4 56 3.23 30 21 1.7 Extent = 15.1 (10.9-18.9)", rotation angle = 0 Source aperture counts = 6404.3 +/- 83.8 Background aperture counts = 444.7 Rate = 0.07 +/- 0.0009 [Sun Jun 23 22:10:37 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 23 22:10:37 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50.arf [Sun Jun 23 22:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 23 22:10:37 2013] Updating source flux to 5.5e-14 [Sun Jun 23 22:10:48 2013] Flag b found in src. 50 procflags, skipping spectral fitting [Sun Jun 23 22:10:48 2013] Flag c found in src. 50 procflags, skipping spectral fitting [Sun Jun 23 22:10:57 2013] xmm0671960101/analysis//spectral/fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete