[Sun Jun 23 06:19:19 2013] Detection parameters:
  Position = (268.4, 137.7) = 4 56 6.96 30 20 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 13.6
  Background counts = 32.9
  Rate = 0.0006 +/- 0.0001

[Sun Jun 23 06:19:19 2013] Off-axis axis estimate = 11.85'
[Sun Jun 23 09:33:29 2013] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:33:29 2013] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Jun 23 09:33:29 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.098
[Sun Jun 23 09:33:29 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 12.36"
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48.csv
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48.csv
[Sun Jun 23 12:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Jun 23 12:03:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:21 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 12.195954 pixels away
[Sun Jun 23 12:04:21 2013] Source 49 is offset by 6.780020 and 0.929800 pixels which is larger than
2 X fitted extent = 4.651127 x 4.651127, not incorporating fit results
[Sun Jun 23 12:04:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:21 2013] Assessing source extent using major
[Sun Jun 23 12:04:21 2013] Source does appear to be extended
[Sun Jun 23 12:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:57:00 2013] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:57:00 2013] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Jun 23 14:57:00 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.098
[Sun Jun 23 14:57:00 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 12.36"
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src44.ximg exists
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src44_1.ximg exists
[Sun Jun 23 17:20:30 2013] Fit fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src44 appears to have run properly
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sun Jun 23 17:20:30 2013] Fit fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sun Jun 23 17:20:58 2013] Spatial fit model total counts = 596.591000, observed total counts = 596.000000
[Sun Jun 23 17:20:58 2013] Offset between fit and detection position for source 49 = 2.232532 pixels
[Sun Jun 23 17:20:58 2013] 522.879200 total counts/ 442.229000 bgd. counts: snr = 3.835145
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.232532 pixels
  Position = (270.3, 138.7) = 4 56 6.30 30 20 33.5
  Extent = 24.7 (20.2-49.4)", rotation angle = 329 (324-333) degrees
  Source counts = 80.7 +/- 22.9
  Background counts = 442.2
  Rate = 0.0008 +/- 0.0002
[Sun Jun 23 17:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:58 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 17:20:58 2013] Source does appear to be extended
[Sun Jun 23 17:20:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.70
[Sun Jun 23 17:20:58 2013] Source is asymmetric
[Sun Jun 23 17:20:58 2013] Source is confused with source 2
[Sun Jun 23 17:20:58 2013] Source is confused with source 50
[Sun Jun 23 17:20:58 2013] Source is confused with source 47
[Sun Jun 23 20:49:47 2013] XMMSAS src. selection expression = ellipse(23471.740000, 12022.647800, 1482.666043, 185.332805, 329.006100, X, Y)
[Sun Jun 23 20:49:47 2013] Writing source region out to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_src.reg
[Sun Jun 23 20:49:47 2013] Extracting stamp from image fullrun_mos2_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (185, 54) - (356, 224)
[Sun Jun 23 20:49:47 2013] XMMSAS bgd. selection expression = annulus(23471.740000, 12022.647800, 2471.110071, 4942.220142, X, Y) && !ellipse(27772.316000, 11633.418000, 1745.288050, 841.472024, 18.904600, X, Y) && !ellipse(24506.673000, 12589.655000, 614.740018, 259.371207, 11.159300, X, Y) && !ellipse(28786.254517, 11008.314415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18105.486000, 16412.996000, 1893.488054, 1893.488054, 0.000000, X, Y) && !ellipse(26872.630000, 11896.242000, 830.528024, 830.528024, 0.000000, X, Y) && !ellipse(21049.366394, 14326.058273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.516000, 12585.962000, 1206.664035, 1206.664035, 0.000000, X, Y) && !ellipse(26449.576508, 11454.288315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23316.556976, 12905.491486, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49.gif
[Sun Jun 23 21:09:04 2013] Mean detx,y = (2709.85, -15662.95) 
[Sun Jun 23 21:09:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 21:09:38 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 21:09:38 2013] Setting source spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Jun 23 21:09:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun Jun 23 22:07:20 2013] Not generating rmf since there are only 80 counts
[Sun Jun 23 22:07:20 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:35 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:35 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 213.00
[Sun Jun 23 22:10:35 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 4544.00
[Sun Jun 23 22:10:35 2013] Got source and background scale factors 872000.000000, 25637052.000000
[Sun Jun 23 22:10:35 2013] User source parameters:
  Position = (270.3, 138.7) = 4 56 6.30 30 20 33.5
  Extent = 24.7 (20.2-49.4)", rotation angle = 329 (324-333) degrees
  Source aperture counts = 58.4 +/- 15.6
  Background aperture counts = 154.6
  Rate = 0.0006 +/- 0.0002

[Sun Jun 23 22:10:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:37 2013] Using photon index=1.80, rate=0.000829, arf fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49.arf
[Sun Jun 23 22:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:37 2013] Updating source flux to 3e-14
[Sun Jun 23 22:10:48 2013] Flag b found in src. 49 procflags, skipping spectral fitting
[Sun Jun 23 22:10:48 2013] Flag c found in src. 49 procflags, skipping spectral fitting
[Sun Jun 23 22:10:48 2013] Source 49 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 22:10:57 2013] xmm0671960101/analysis//spectral/fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete