[Sun Jun 23 06:19:19 2013] Detection parameters:
  Position = (247.4, 238.7) = 4 56 14.04 30 27 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 15.7
  Background counts = 37.7
  Rate = 0.002 +/- 0.0002

[Sun Jun 23 06:19:19 2013] Off-axis axis estimate = 5.70'
[Sun Jun 23 09:33:29 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:33:29 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun 23 09:33:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.902
[Sun Jun 23 09:33:29 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.28"
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25.csv
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25.csv
[Sun Jun 23 12:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 23 12:03:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:21 2013] Source 40 is offset by 0.409025 and -1.550604 pixels which is larger than
2 X fitted extent = 3.508584 x 1.468276, not incorporating fit results
[Sun Jun 23 12:04:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:21 2013] Assessing source extent using major
[Sun Jun 23 12:04:21 2013] Source does appear to be extended
[Sun Jun 23 12:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:57:00 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:57:00 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun 23 14:57:00 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.902
[Sun Jun 23 14:57:00 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.28"
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25.csv
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25.csv
[Sun Jun 23 17:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun 23 17:20:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:58 2013] Spatial fit model total counts = 554.454000, observed total counts = 394.000000
[Sun Jun 23 17:20:58 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 17:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:58 2013] Assessing source extent using major
[Sun Jun 23 17:20:58 2013] Source does appear to be extended
[Sun Jun 23 17:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 20:49:47 2013] XMMSAS src. selection expression = ellipse(21472.482483, 20715.986313, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing source region out to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_src.reg
[Sun Jun 23 20:49:47 2013] Extracting stamp from image fullrun_mos2_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (210, 201) - (285, 276)
[Sun Jun 23 20:49:47 2013] XMMSAS bgd. selection expression = annulus(21472.482483, 20715.986313, 1087.500000, 2175.000000, X, Y) && !ellipse(22623.759600, 22707.070600, 369.014149, 369.014149, 0.000000, X, Y) && !ellipse(19887.326447, 23519.526001, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40.gif
[Sun Jun 23 21:00:55 2013] Mean detx,y = (5291.78, -7146.69) 
[Sun Jun 23 21:00:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 21:01:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 21:01:25 2013] Setting source spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jun 23 21:01:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Jun 23 21:57:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 21:57:49 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:32 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:32 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 297.00
[Sun Jun 23 22:10:32 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 1614.00
[Sun Jun 23 22:10:32 2013] Got source and background scale factors 1020986.000000, 9769470.000000
[Sun Jun 23 22:10:32 2013] User source parameters:
  Position = (247.4, 238.7) = 4 56 14.04 30 27 56.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 128.3 +/- 18.3
  Background aperture counts = 168.7
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 22:10:32 2013] Updating counts from extracted products
[Sun Jun 23 22:10:32 2013] Set source signif. to 128.32/12.99 = 9.88
[Sun Jun 23 22:10:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:36 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40.arf
[Sun Jun 23 22:10:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:36 2013] Updating source flux to 2.7e-14
[Sun Jun 23 22:10:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:10:57 2013] xmm0671960101/analysis//spectral/fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete