[Sun Jun 23 06:19:18 2013] Detection parameters:
  Position = (326.3, 331.9) = 4 55 47.48 30 34 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.5 +/- 16.0
  Background counts = 43.7
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 06:19:19 2013] Off-axis axis estimate = 3.16'
[Sun Jun 23 09:33:29 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:33:29 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 23 09:33:29 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sun Jun 23 09:33:29 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.01"
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 12:03:53 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun 23 12:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 12:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 12:03:54 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun 23 12:03:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 12:03:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:21 2013] Spatial fit model total counts = 533.537000, observed total counts = 463.000000
[Sun Jun 23 12:04:21 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 12:04:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:21 2013] Assessing source extent using major
[Sun Jun 23 12:04:21 2013] Source does appear to be extended
[Sun Jun 23 12:04:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:57:00 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:57:00 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 23 14:57:00 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sun Jun 23 14:57:00 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 8.01"
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28.csv
[Sun Jun 23 17:20:29 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun 23 17:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28.csv
[Sun Jun 23 17:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun 23 17:20:30 2013] fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun 23 17:20:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun Jun 23 17:20:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:58 2013] Source 19 is offset by -3.998325 and -7.241375 pixels which is larger than
2 X fitted extent = 0.920428 x 0.920428, not incorporating fit results
[Sun Jun 23 17:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:58 2013] Assessing source extent using major
[Sun Jun 23 17:20:58 2013] Source does appear to be extended
[Sun Jun 23 17:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 20:49:47 2013] XMMSAS src. selection expression = ellipse(28338.199738, 28829.940369, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing source region out to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 23 20:49:47 2013] Extracting stamp from image fullrun_mos2_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (289, 294) - (364, 369)
[Sun Jun 23 20:49:47 2013] XMMSAS bgd. selection expression = annulus(28338.199738, 28829.940369, 1087.500000, 2175.000000, X, Y) && !ellipse(25234.874400, 28185.096000, 1187.995234, 971.198428, 336.030400, X, Y) && !ellipse(28750.397402, 27025.580600, 417.156812, 367.646411, 79.669000, X, Y) && !ellipse(26131.079193, 30944.148163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.771200, 27588.343600, 363.257610, 243.232007, 31.283000, X, Y) && !ellipse(25969.377289, 29057.234772, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 20:49:47 2013] Writing fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19.gif
[Sun Jun 23 21:02:11 2013] Mean detx,y = (-1081.89, 1415.58) 
[Sun Jun 23 21:02:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 21:02:18 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 21:02:19 2013] Setting source spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 23 21:02:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 23 21:58:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 21:58:21 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:33 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:33 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 356.00
[Sun Jun 23 22:10:33 2013] Total counts from fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 2025.00
[Sun Jun 23 22:10:33 2013] Got source and background scale factors 1188824.000000, 9133668.000000
[Sun Jun 23 22:10:33 2013] User source parameters:
  Position = (326.3, 331.9) = 4 55 47.48 30 34 33.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.4 +/- 19.9
  Background aperture counts = 263.6
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 22:10:33 2013] Updating counts from extracted products
[Sun Jun 23 22:10:33 2013] Set source signif. to 92.43/16.23 = 5.69
[Sun Jun 23 22:10:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:36 2013] Using photon index=1.80, rate=0.00095, arf fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19.arf
[Sun Jun 23 22:10:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:36 2013] Updating source flux to 1.2e-14
[Sun Jun 23 22:10:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:10:57 2013] xmm0671960101/analysis//spectral/fullrun_mos2_xmm0671960101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete