[Sun Jun 23 06:18:44 2013] Detection parameters:
  Position = (425.6, 162.3) = 4 55 14.11 30 22 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.1 +/- 14.9
  Background counts = 33.2
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 06:18:45 2013] Off-axis axis estimate = 13.51'
[Sun Jun 23 08:27:23 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:27:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 08:27:23 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Sun Jun 23 08:27:23 2013] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.903
[Sun Jun 23 08:27:23 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 13.18"
[Sun Jun 23 09:33:28 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jun 23 09:33:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27.csv
[Sun Jun 23 09:33:28 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jun 23 09:33:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27.csv
[Sun Jun 23 09:33:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:33:29 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jun 23 09:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun 23 09:33:29 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jun 23 09:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun 23 09:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:11 2013] Spatial fit model total counts = 495.662000, observed total counts = 365.000000
[Sun Jun 23 12:04:11 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 12:04:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:11 2013] Assessing source extent using major
[Sun Jun 23 12:04:11 2013] Source does appear to be extended
[Sun Jun 23 12:04:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:01:24 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:01:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 14:01:24 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Sun Jun 23 14:01:24 2013] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.903
[Sun Jun 23 14:01:24 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.18"
[Sun Jun 23 14:57:00 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun 23 14:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27.csv
[Sun Jun 23 14:57:00 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun 23 14:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27.csv
[Sun Jun 23 14:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:57:00 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun 23 14:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun 23 14:57:00 2013] fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun 23 14:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun 23 14:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:49 2013] Spatial fit model total counts = 495.650000, observed total counts = 365.000000
[Sun Jun 23 17:20:49 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 17:20:49 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:49 2013] Assessing source extent using major
[Sun Jun 23 17:20:49 2013] Source does appear to be extended
[Sun Jun 23 17:20:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 19:41:45 2013] XMMSAS src. selection expression = ellipse(36980.221863, 14072.691483, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 19:41:45 2013] Writing source region out to fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 19:41:45 2013] Extracting stamp from image fullrun_mos1_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (388, 125) - (463, 200)
[Sun Jun 23 19:41:45 2013] XMMSAS bgd. selection expression = annulus(36980.221863, 14072.691483, 1087.500000, 2175.000000, X, Y) && !ellipse(37840.392944, 14046.376160, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 19:41:45 2013] Writing fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 19:52:32 2013] Mean detx,y = (-12506.83, 10458.89) 
[Sun Jun 23 19:52:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 19:52:50 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 19:52:50 2013] Setting source spectrum file to fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 23 19:52:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 20:48:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 20:48:25 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:26 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:27 2013] Total counts from fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 273.00
[Sun Jun 23 22:10:27 2013] Total counts from fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 737.00
[Sun Jun 23 22:10:27 2013] Got source and background scale factors 993854.000000, 4368458.000000
[Sun Jun 23 22:10:27 2013] User source parameters:
  Position = (425.6, 162.3) = 4 55 14.11 30 22 17.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 105.3 +/- 17.5
  Background aperture counts = 167.7
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 22:10:27 2013] Updating counts from extracted products
[Sun Jun 23 22:10:27 2013] Set source signif. to 105.33/12.95 = 8.13
[Sun Jun 23 22:10:28 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:28 2013] Using photon index=1.80, rate=0.00109, arf fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 22:10:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:28 2013] Updating source flux to 3.5e-14
[Sun Jun 23 22:10:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:10:48 2013] xmm0671960101/analysis//spectral/fullrun_mos1_xmm0671960101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete