[Sun Jun 23 12:05:54 2013] Detection parameters:
  Position = (187.4, 316.0) = 13 9 10.43 -9 47 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 13.8
  Background counts = 63.9
  Rate = 0.007 +/- 0.001

[Sun Jun 23 12:05:54 2013] Off-axis axis estimate = 8.15'
[Sun Jun 23 12:08:01 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:08:01 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sun Jun 23 12:08:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.647
[Sun Jun 23 12:08:01 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.50"
[Sun Jun 23 12:33:19 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 23 12:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 23 12:33:19 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 23 12:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 23 12:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:33:19 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 23 12:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 23 12:33:19 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 23 12:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 23 12:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:03:36 2013] Warning, spatial fit 10 centroid is now closest to src. 12
[Sun Jun 23 13:03:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:03:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:03:36 2013] Assessing source extent using major
[Sun Jun 23 13:03:36 2013] Source does appear to be extended
[Sun Jun 23 13:03:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:03:46 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 13:03:46 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sun Jun 23 13:03:46 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.647
[Sun Jun 23 13:03:46 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.50"
[Sun Jun 23 13:27:26 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 23 13:27:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 23 13:27:26 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 23 13:27:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 23 13:27:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:27:26 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 23 13:27:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 23 13:27:26 2013] fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 23 13:27:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 23 13:27:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:29 2013] Source 11 is offset by -9.228275 and 2.767097 pixels which is larger than
2 X fitted extent = 1.286303 x 1.286303, not incorporating fit results
[Sun Jun 23 14:01:29 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 14:01:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 14:01:29 2013] Assessing source extent using major
[Sun Jun 23 14:01:29 2013] Source does appear to be extended
[Sun Jun 23 14:01:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:01:39 2013] XMMSAS src. selection expression = ellipse(16254.860062, 27444.535461, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:01:39 2013] Writing source region out to fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 23 14:01:39 2013] Extracting stamp from image fullrun_pn_xmm0671871201_pi300-10000_cl_sm2.00.img.gz, (150, 279) - (225, 354)
[Sun Jun 23 14:01:39 2013] XMMSAS bgd. selection expression = annulus(16254.860062, 27444.535461, 1087.500000, 2175.000000, X, Y) && !ellipse(16953.615000, 27248.216600, 317.480809, 317.480809, 0.000000, X, Y)
[Sun Jun 23 14:01:39 2013] Writing fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11.gif
[Sun Jun 23 14:09:40 2013] Mean detx,y = (7260.63, 6477.90) 
[Sun Jun 23 14:09:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:10:06 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:10:06 2013] Setting source spectrum file to fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 23 14:10:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 23 14:24:39 2013] Not generating rmf since there are only 81 counts
[Sun Jun 23 14:24:39 2013] rmf not generated due to insufficient counts
[Sun Jun 23 14:41:08 2013] Updating aperture counts using extracted products
[Sun Jun 23 14:41:08 2013] Total counts from fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 198.00
[Sun Jun 23 14:41:08 2013] Total counts from fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1431.00
[Sun Jun 23 14:41:08 2013] Got source and background scale factors 1059703.000000, 9921080.000000
[Sun Jun 23 14:41:08 2013] User source parameters:
  Position = (187.4, 316.0) = 13 9 10.43 -9 47 36.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.2 +/- 15.1
  Background aperture counts = 152.8
  Rate = 0.003 +/- 0.0009

[Sun Jun 23 14:41:08 2013] Updating counts from extracted products
[Sun Jun 23 14:41:08 2013] Set source signif. to 45.15/12.36 = 3.65
[Sun Jun 23 14:41:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 14:41:10 2013] Using photon index=1.80, rate=0.00261, arf fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11.arf
[Sun Jun 23 14:41:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 14:41:10 2013] Updating source flux to 1.3e-14
[Sun Jun 23 14:41:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 14:41:20 2013] xmm0671871201/analysis//spectral/fullrun_pn_xmm0671871201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete