[Sun Jun 23 12:06:12 2013] Detection parameters:
  Position = (255.9, 335.0) = 13 8 50.27 -9 46 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.3 +/- 16.1
  Background counts = 19.4
  Rate = 0.006 +/- 0.001

[Sun Jun 23 12:06:12 2013] Off-axis axis estimate = 4.07'
[Sun Jun 23 12:33:19 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:33:19 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Jun 23 12:33:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.544
[Sun Jun 23 12:33:19 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.46"
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 23 12:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 23 12:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 12:46:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 23 12:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 23 12:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 12:46:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:03:38 2013] Source 4 is offset by 0.095846 and 2.140782 pixels which is larger than
2 X fitted extent = 3.535577 x 0.972662, not incorporating fit results
[Sun Jun 23 13:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:03:38 2013] Assessing source extent using major
[Sun Jun 23 13:03:38 2013] Source does appear to be extended
[Sun Jun 23 13:03:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:27:26 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 13:27:26 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Jun 23 13:27:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 13, frac = 0.544
[Sun Jun 23 13:27:26 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.46"
[Sun Jun 23 13:42:01 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 23 13:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 13:42:01 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 23 13:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 13:42:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:42:02 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 23 13:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 13:42:02 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 23 13:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 13:42:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:30 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 68.454488 pixels away
[Sun Jun 23 14:01:30 2013] Source 4 is offset by 0.050725 and 2.120736 pixels which is larger than
2 X fitted extent = 3.456874 x 0.972662, not incorporating fit results
[Sun Jun 23 14:01:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 14:01:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 14:01:30 2013] Assessing source extent using major
[Sun Jun 23 14:01:30 2013] Source does appear to be extended
[Sun Jun 23 14:01:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:26:05 2013] XMMSAS src. selection expression = ellipse(22213.937912, 29096.500000, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:26:05 2013] Writing source region out to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 14:26:05 2013] Extracting stamp from image fullrun_mos1_xmm0671871201_pi300-10000_cl_sm2.00.img.gz, (218, 298) - (293, 372)
[Sun Jun 23 14:26:05 2013] XMMSAS bgd. selection expression = annulus(22213.937912, 29096.500000, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 14:26:05 2013] Writing fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 14:26:18 2013] Mean detx,y = (-5697.74, 947.98) 
[Sun Jun 23 14:26:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:26:34 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:26:34 2013] Setting source spectrum file to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 23 14:26:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 14:32:38 2013] Not generating rmf since there are only 90 counts
[Sun Jun 23 14:32:38 2013] rmf not generated due to insufficient counts
[Sun Jun 23 14:41:10 2013] Updating aperture counts using extracted products
[Sun Jun 23 14:41:11 2013] Total counts from fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 131.00
[Sun Jun 23 14:41:11 2013] Total counts from fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 503.00
[Sun Jun 23 14:41:11 2013] Got source and background scale factors 1179776.000000, 7068753.000000
[Sun Jun 23 14:41:11 2013] User source parameters:
  Position = (255.9, 335.0) = 13 8 50.27 -9 46 23.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.0 +/- 12.5
  Background aperture counts = 84.0
  Rate = 0.002 +/- 0.0006

[Sun Jun 23 14:41:11 2013] Updating counts from extracted products
[Sun Jun 23 14:41:11 2013] Set source signif. to 47.05/9.16 = 5.13
[Sun Jun 23 14:41:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 14:41:12 2013] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 14:41:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 14:41:12 2013] Updating source flux to 3.1e-14
[Sun Jun 23 14:41:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 14:41:17 2013] xmm0671871201/analysis//spectral/fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete