[Sun Jun 23 12:06:11 2013] Detection parameters:
  Position = (293.5, 275.7) = 13 8 39.21 -9 50 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 901.9 +/- 36.9
  Background counts = 22.2
  Rate = 0.04 +/- 0.002

[Sun Jun 23 12:06:12 2013] Off-axis axis estimate = 1.69'
[Sun Jun 23 12:33:19 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:33:19 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Jun 23 12:33:19 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Sun Jun 23 12:33:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 23 12:46:53 2013] Fit fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 23 12:46:53 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 23 12:46:53 2013] Fit fullrun_mos1_xmm0671871201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 23 13:03:38 2013] Spatial fit model total counts = 844.970000, observed total counts = 841.000000
[Sun Jun 23 13:03:38 2013] Offset between fit and detection position for source 1 = 0.149123 pixels
[Sun Jun 23 13:03:38 2013] 844.703000 total counts/ 277.461000 bgd. counts: snr = 34.053943
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.149123 pixels
  Position = (293.5, 275.6) = 13 8 39.20 -9 50 31.8
  Extent = 6.0 (5.5-6.6)" x 5.1 (4.6-5.7)", rotation angle = 323 (118-167) degrees
  Source counts = 567.2 +/- 29.1
  Background counts = 277.5
  Rate = 0.03 +/- 0.001
[Sun Jun 23 13:03:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 13:03:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 13:03:38 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 13:03:38 2013] Source does appear to be extended
[Sun Jun 23 13:03:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Sun Jun 23 13:27:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 13:27:26 2013] Initial guess for spatial extent in simple fitting = 5.59"
[Sun Jun 23 13:27:26 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.707
[Sun Jun 23 13:27:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.59"
[Sun Jun 23 13:42:01 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 13:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 13:42:01 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 13:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 13:42:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:42:02 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 13:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 13:42:02 2013] fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 13:42:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 13:42:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671871201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:30 2013] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Jun 23 14:01:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 14:01:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 14:01:30 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 14:01:30 2013] Source does appear to be extended
[Sun Jun 23 14:01:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Sun Jun 23 14:26:05 2013] XMMSAS src. selection expression = ellipse(25487.961000, 23927.445200, 362.632810, 307.786809, 322.611325, X, Y)
[Sun Jun 23 14:26:05 2013] Writing source region out to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 14:26:05 2013] Extracting stamp from image fullrun_mos1_xmm0671871201_pi300-10000_cl_sm2.00.img.gz, (273, 255) - (314, 296)
[Sun Jun 23 14:26:05 2013] XMMSAS bgd. selection expression = annulus(25487.961000, 23927.445200, 604.388017, 1208.776035, X, Y)
[Sun Jun 23 14:26:05 2013] Writing fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 14:26:07 2013] Mean detx,y = (289.04, -236.29) 
[Sun Jun 23 14:26:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:26:15 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:26:15 2013] Setting source spectrum file to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 14:26:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 14:41:10 2013] Updating aperture counts using extracted products
[Sun Jun 23 14:41:10 2013] Total counts from fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 613.00
[Sun Jun 23 14:41:10 2013] Total counts from fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 321.00
[Sun Jun 23 14:41:10 2013] Got source and background scale factors 350400.000000, 3316768.000000
[Sun Jun 23 14:41:10 2013] User source parameters:
  Position = (293.5, 275.6) = 13 8 39.20 -9 50 31.8
  Extent = 6.0 (5.5-6.6)" x 5.1 (4.6-5.7)", rotation angle = 323 (118-167) degrees
  Source aperture counts = 579.1 +/- 25.8
  Background aperture counts = 33.9
  Rate = 0.03 +/- 0.001

[Sun Jun 23 14:41:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 14:41:12 2013] Using photon index=1.80, rate=0.0271, arf fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 14:41:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 14:41:12 2013] Updating source flux to 3.2e-13
[Sun Jun 23 14:41:17 2013] xmm0671871201/analysis//spectral/fullrun_mos1_xmm0671871201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete