[Mon Aug 27 01:28:00 2012] Detection parameters:
  Position = (306.6, 321.1) = 13 59 0.33 -41 52 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10522.6 +/- 120.8
  Background counts = 11.1
  Rate = 0.7 +/- 0.008

[Mon Aug 27 01:28:01 2012] Off-axis axis estimate = 1.74'
[Mon Aug 27 02:54:23 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 02:54:23 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Aug 27 02:54:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Mon Aug 27 02:54:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 03:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 03:21:25 2012] Fit fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 03:21:40 2012] Spatial fit model total counts = 9717.940000, observed total counts = 9508.000000
[Mon Aug 27 03:21:40 2012] Offset between fit and detection position for source 2 = 0.201532 pixels
[Mon Aug 27 03:21:40 2012] 9759.310000 total counts/ 2359.010000 bgd. counts: snr = 152.364726
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.201532 pixels
  Position = (306.4, 321.1) = 13 59 0.40 -41 52 52.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 7400.3 +/- 98.8
  Background counts = 2359.0
  Rate = 0.5 +/- 0.007
[Mon Aug 27 03:21:40 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 03:21:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 03:21:40 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 03:21:40 2012] Source does appear to be extended
[Mon Aug 27 03:21:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 04:47:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 04:47:38 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Mon Aug 27 04:47:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.966
[Mon Aug 27 04:47:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 05:12:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 05:12:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 05:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 05:12:02 2012] Fit fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 27 05:12:14 2012] Spatial fit model total counts = 9717.880000, observed total counts = 9508.000000
[Mon Aug 27 05:12:14 2012] Offset between fit and detection position for source 2 = 0.000007 pixels
[Mon Aug 27 05:12:14 2012] 9759.230000 total counts/ 2358.580000 bgd. counts: snr = 152.385821
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000007 pixels
  Position = (306.4, 321.1) = 13 59 0.40 -41 52 52.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 7400.6 +/- 98.8
  Background counts = 2358.6
  Rate = 0.5 +/- 0.007
[Mon Aug 27 05:12:14 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 05:12:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 05:12:14 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 05:12:14 2012] Source does appear to be extended
[Mon Aug 27 05:12:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 05:38:02 2012] Counts = 7400.650000, rescaling region sizes by 2.000000
[Mon Aug 27 05:38:02 2012] XMMSAS src. selection expression = ellipse(26604.938600, 27888.602400, 659.186419, 659.186419, 0.000000, X, Y)
[Mon Aug 27 05:38:02 2012] Writing source region out to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug 27 05:38:02 2012] Extracting stamp from image fullrun_mos2_xmm0671870501_pi300-10000_cl_sm2.00.img.gz, (268, 283) - (344, 359)
[Mon Aug 27 05:38:02 2012] XMMSAS bgd. selection expression = annulus(26604.938600, 27888.602400, 2197.288063, 4394.576126, X, Y) && !ellipse(29191.439440, 30003.228600, 513.733615, 221.205606, 42.824653, X, Y) && !ellipse(28682.415800, 27744.509800, 419.908012, 419.908012, 0.000000, X, Y) && !ellipse(27724.285278, 27370.497314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27591.406372, 30814.091553, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 05:38:02 2012] Writing fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2.gif
[Mon Aug 27 05:38:05 2012] Mean detx,y = (82.95, 130.64) 
[Mon Aug 27 05:38:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 05:38:19 2012] grppha failed
[Mon Aug 27 05:38:19 2012] Setting source spectrum file to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Aug 27 05:38:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug 27 05:41:34 2012] Updating aperture counts using extracted products
[Mon Aug 27 05:41:34 2012] Error reading totcts from fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Aug 27 05:41:34 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 05:41:37 2012] Source 2 has no response, skipping
[Mon Aug 27 05:41:38 2012] xmm0671870501/analysis//spectral/fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete