[Mon Aug 27 01:28:00 2012] Detection parameters:
  Position = (119.2, 276.0) = 14 0 13.37 -41 56 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.0 +/- 9.9
  Background counts = 4.0
  Rate = 0.004 +/- 0.0007

[Mon Aug 27 01:28:01 2012] Off-axis axis estimate = 13.10'
[Mon Aug 27 02:54:23 2012] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 02:54:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 02:54:23 2012] Initial guess for spatial extent in simple fitting = 12.98"
[Mon Aug 27 02:54:23 2012] source mask rpix=3.0, npix_max = 48, mask sum = 40, frac = 0.824
[Mon Aug 27 02:54:23 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.98"
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10.csv
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10.csv
[Mon Aug 27 03:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Aug 27 03:21:25 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Aug 27 03:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Aug 27 03:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671870501_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 03:21:40 2012] Spatial fit model total counts = 96.952800, observed total counts = 81.000000
[Mon Aug 27 03:21:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 03:21:40 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 03:21:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 03:21:40 2012] Assessing source extent using major
[Mon Aug 27 03:21:40 2012] Source does appear to be extended
[Mon Aug 27 03:21:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 04:47:38 2012] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 04:47:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 04:47:38 2012] Initial guess for spatial extent in simple fitting = 12.98"
[Mon Aug 27 04:47:38 2012] source mask rpix=3.0, npix_max = 48, mask sum = 40, frac = 0.824
[Mon Aug 27 04:47:38 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.98"
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src10.ximg exists
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Aug 27 05:12:02 2012] Fit fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Aug 27 05:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Aug 27 05:12:02 2012] fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Aug 27 05:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Aug 27 05:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671870501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 05:12:14 2012] Spatial fit model total counts = 87.065100, observed total counts = 81.000000
[Mon Aug 27 05:12:14 2012] Offset between fit and detection position for source 1 = 0.243308 pixels
[Mon Aug 27 05:12:14 2012] 89.848300 total counts/ 37.986800 bgd. counts: snr = 8.414508
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.243308 pixels
  Position = (119.4, 276.0) = 14 0 13.28 -41 56 7.2
  Extent = 9.0 (6.7-12.9)" x 3.9 (3.2-5.8)", rotation angle = 73 (60-86) degrees
  Source counts = 51.9 +/- 9.5
  Background counts = 38.0
  Rate = 0.003 +/- 0.0006
[Mon Aug 27 05:12:14 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 05:12:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 05:12:14 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 05:12:14 2012] Source does appear to be extended
[Mon Aug 27 05:12:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon Aug 27 05:38:02 2012] XMMSAS src. selection expression = ellipse(10341.318400, 23967.044800, 542.325016, 233.526607, 72.809746, X, Y)
[Mon Aug 27 05:38:02 2012] Writing source region out to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 27 05:38:02 2012] Extracting stamp from image fullrun_mos2_xmm0671870501_pi300-10000_cl_sm2.00.img.gz, (88, 245) - (151, 307)
[Mon Aug 27 05:38:02 2012] XMMSAS bgd. selection expression = annulus(10341.318400, 23967.044800, 903.875026, 1807.750052, X, Y)
[Mon Aug 27 05:38:02 2012] Writing fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1.gif
[Mon Aug 27 05:39:46 2012] Mean detx,y = (16800.20, -25.18) 
[Mon Aug 27 05:39:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 05:40:01 2012] grppha failed
[Mon Aug 27 05:40:01 2012] Setting source spectrum file to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 05:40:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 27 05:41:12 2012] Not generating rmf since there are only 51 counts
[Mon Aug 27 05:41:12 2012] rmf not generated due to insufficient counts
[Mon Aug 27 05:41:34 2012] Updating aperture counts using extracted products
[Mon Aug 27 05:41:34 2012] Error reading totcts from fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 05:41:34 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 05:41:37 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon Aug 27 05:41:37 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 05:41:38 2012] xmm0671870501/analysis//spectral/fullrun_mos2_xmm0671870501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete