[Wed Jun 12 01:56:11 2013] Detection parameters:
  Position = (121.8, 333.1) = 3 7 1.34 -15 35 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.2 +/- 17.6
  Background counts = 53.2
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 01:56:13 2013] Off-axis axis estimate = 13.05'
[Wed Jun 12 03:40:36 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 03:40:36 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Wed Jun 12 03:40:36 2013] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.785
[Wed Jun 12 03:40:36 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 12.95"
[Wed Jun 12 05:07:18 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Jun 12 05:07:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 12 05:07:18 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Jun 12 05:07:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39.csv
[Wed Jun 12 05:07:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 05:07:18 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Jun 12 05:07:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 12 05:07:18 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Jun 12 05:07:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Jun 12 05:07:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671700101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 06:10:30 2013] Spatial fit model total counts = 495.827000, observed total counts = 254.000000
[Wed Jun 12 06:10:30 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 06:10:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 06:10:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 06:10:31 2013] Assessing source extent using major
[Wed Jun 12 06:10:31 2013] Source does appear to be extended
[Wed Jun 12 06:10:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 07:41:55 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 07:41:55 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Wed Jun 12 07:41:55 2013] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.785
[Wed Jun 12 07:41:55 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 12.95"
[Wed Jun 12 09:08:21 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38.ximg exists
[Wed Jun 12 09:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38.csv
[Wed Jun 12 09:08:21 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed Jun 12 09:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38.csv
[Wed Jun 12 09:08:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 09:08:22 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed Jun 12 09:08:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Jun 12 09:08:22 2013] fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Jun 12 09:08:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Jun 12 09:08:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671700101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 10:08:35 2013] Spatial fit model total counts = 487.420000, observed total counts = 254.000000
[Wed Jun 12 10:08:35 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 10:08:35 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 10:08:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 10:08:35 2013] Assessing source extent using major
[Wed Jun 12 10:08:35 2013] Source does appear to be extended
[Wed Jun 12 10:08:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:12:14 2013] XMMSAS src. selection expression = ellipse(10549.597702, 28929.628754, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:12:14 2013] Writing source region out to fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_src.reg
[Wed Jun 12 12:12:14 2013] Extracting stamp from image fullrun_mos1_xmm0671700101_pi300-10000_cl_sm2.00.img.gz, (84, 296) - (159, 371)
[Wed Jun 12 12:12:14 2013] XMMSAS bgd. selection expression = annulus(10549.597702, 28929.628754, 1087.500000, 2175.000000, X, Y) && !ellipse(12474.353200, 29423.979200, 682.379220, 325.594409, 99.430340, X, Y) && !ellipse(10275.590050, 26930.357178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11230.214462, 28642.843109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11851.642800, 31931.843600, 975.384028, 975.384028, 0.000000, X, Y) && !ellipse(11017.201462, 31547.232758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10818.327820, 29965.493744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10365.762810, 28201.463074, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:12:14 2013] Writing fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15.gif
[Wed Jun 12 12:27:27 2013] Mean detx,y = (-1517.35, -16846.63) 
[Wed Jun 12 12:27:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 12:27:38 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 12:27:38 2013] Setting source spectrum file to fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 12 12:27:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jun 12 13:08:43 2013] Not generating rmf since there are only 97 counts
[Wed Jun 12 13:08:43 2013] rmf not generated due to insufficient counts
[Wed Jun 12 14:07:18 2013] Updating aperture counts using extracted products
[Wed Jun 12 14:07:18 2013] Total counts from fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 155.00
[Wed Jun 12 14:07:18 2013] Total counts from fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 350.00
[Wed Jun 12 14:07:18 2013] Got source and background scale factors 886796.000000, 2174091.000000
[Wed Jun 12 14:07:18 2013] User source parameters:
  Position = (121.8, 333.1) = 3 7 1.34 -15 35 21.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 12.2 +/- 13.5
  Background aperture counts = 142.8
  Rate = 0.0001 +/- 0.0002

[Wed Jun 12 14:07:18 2013] Updating counts from extracted products
[Wed Jun 12 14:07:18 2013] Set source signif. to 12.24/11.95 = 1.02
[Wed Jun 12 14:07:20 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 14:07:20 2013] Using photon index=1.80, rate=0.000145, arf fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15.arf
[Wed Jun 12 14:07:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 14:07:20 2013] Updating source flux to 5.7e-15
[Wed Jun 12 14:07:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 14:07:38 2013] xmm0671700101/analysis//spectral/fullrun_mos1_xmm0671700101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete