[Wed May 15 16:05:38 2013] Detection parameters:
  Position = (487.4, 204.1) = 16 4 8.18 32 43 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.6 +/- 21.0
  Background counts = 73.1
  Rate = 0.003 +/- 0.0004

[Wed May 15 16:05:39 2013] Off-axis axis estimate = 15.31'
[Wed May 15 16:09:39 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Wed May 15 16:09:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 16:09:39 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Wed May 15 16:09:39 2013] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.841
[Wed May 15 16:09:39 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 14.08"
[Wed May 15 18:23:50 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 15 18:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8.csv
[Wed May 15 18:23:50 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 15 18:23:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8.csv
[Wed May 15 18:23:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 18:23:51 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 15 18:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 18:23:51 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 15 18:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 18:23:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671620101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 19:40:32 2013] Spatial fit model total counts = 935.297000, observed total counts = 695.000000
[Wed May 15 19:40:32 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 19:40:32 2013] Vigneting correction estimate = 1.000000
[Wed May 15 19:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 19:40:32 2013] Assessing source extent using major
[Wed May 15 19:40:32 2013] Source does appear to be extended
[Wed May 15 19:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 19:40:32 2013] Source is confused with source 20
[Wed May 15 19:40:51 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Wed May 15 19:40:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 19:40:51 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Wed May 15 19:40:51 2013] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.841
[Wed May 15 19:40:51 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 14.08"
[Wed May 15 21:44:51 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 15 21:44:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8.csv
[Wed May 15 21:44:51 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 15 21:44:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8.csv
[Wed May 15 21:44:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 21:44:52 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 15 21:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 15 21:44:52 2013] fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 15 21:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 15 21:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671620101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 22:38:26 2013] Spatial fit model total counts = 936.105000, observed total counts = 695.000000
[Wed May 15 22:38:26 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 22:38:26 2013] Spatial fit model total counts = 994.964000, observed total counts = 778.000000
[Wed May 15 22:38:26 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 22:38:26 2013] Vigneting correction estimate = 1.000000
[Wed May 15 22:38:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 22:38:26 2013] Assessing source extent using major
[Wed May 15 22:38:26 2013] Source does appear to be extended
[Wed May 15 22:38:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 22:38:42 2013] XMMSAS src. selection expression = ellipse(42352.129364, 17707.267288, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 22:38:42 2013] Writing source region out to fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_src.reg
[Wed May 15 22:38:42 2013] Extracting stamp from image fullrun_pn_xmm0671620101_pi300-10000_cl_sm2.00.img.gz, (450, 167) - (525, 242)
[Wed May 15 22:38:42 2013] XMMSAS bgd. selection expression = annulus(42352.129364, 17707.267288, 1087.500000, 2175.000000, X, Y) && !ellipse(42208.463074, 17272.916443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41574.098600, 19535.784400, 1110.440032, 1110.440032, 0.000000, X, Y)
[Wed May 15 22:38:42 2013] Writing fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8.gif
[Wed May 15 22:50:17 2013] Mean detx,y = (-17930.45, -5453.21) 
[Wed May 15 22:50:20 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 22:50:41 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 22:50:41 2013] Setting source spectrum file to fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 15 22:50:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 15 23:48:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 23:48:19 2013] rmf not generated due to insufficient counts
[Thu May 16 01:59:28 2013] Updating aperture counts using extracted products
[Thu May 16 01:59:28 2013] Total counts from fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 390.00
[Thu May 16 01:59:28 2013] Total counts from fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1083.00
[Thu May 16 01:59:28 2013] Got source and background scale factors 891094.000000, 3690186.000000
[Thu May 16 01:59:28 2013] User source parameters:
  Position = (487.4, 204.1) = 16 4 8.18 32 43 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 128.5 +/- 20.8
  Background aperture counts = 261.5
  Rate = 0.003 +/- 0.0004

[Thu May 16 01:59:28 2013] Updating counts from extracted products
[Thu May 16 01:59:28 2013] Set source signif. to 128.48/16.17 = 7.94
[Thu May 16 01:59:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 01:59:48 2013] Using photon index=1.80, rate=0.00274, arf fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8.arf
[Thu May 16 01:59:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 01:59:48 2013] Updating source flux to 3.3e-14
[Thu May 16 02:00:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 02:00:34 2013] xmm0671620101/analysis//spectral/fullrun_pn_xmm0671620101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete