[Sun Jun 16 02:57:52 2013] Detection parameters:
  Position = (239.8, 343.4) = 9 46 22.98 9 56 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 7.4
  Background counts = 9.6
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 02:57:52 2013] Off-axis axis estimate = 5.36'
[Sun Jun 16 04:13:08 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 04:13:08 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Jun 16 04:13:08 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.743
[Sun Jun 16 04:13:08 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.11"
[Sun Jun 16 04:35:26 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 16 04:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 04:35:26 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 16 04:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 04:35:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 04:35:26 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 16 04:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 16 04:35:26 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 16 04:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jun 16 04:35:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 04:35:43 2013] Spatial fit model total counts = 129.592000, observed total counts = 89.000000
[Sun Jun 16 04:35:43 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 04:35:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 04:35:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 04:35:43 2013] Assessing source extent using major
[Sun Jun 16 04:35:43 2013] Source does appear to be extended
[Sun Jun 16 04:35:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:38:42 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 05:38:42 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Jun 16 05:38:42 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.743
[Sun Jun 16 05:38:42 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.11"
[Sun Jun 16 05:59:44 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 16 05:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 05:59:44 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 16 05:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 05:59:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:59:44 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 16 05:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 16 05:59:44 2013] fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 16 05:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jun 16 05:59:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:59:59 2013] Source 10 is offset by -1.180235 and 5.625157 pixels which is larger than
2 X fitted extent = 1.662745 x 1.662745, not incorporating fit results
[Sun Jun 16 05:59:59 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:59:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:59:59 2013] Assessing source extent using major
[Sun Jun 16 05:59:59 2013] Source does appear to be extended
[Sun Jun 16 05:59:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 07:07:22 2013] XMMSAS src. selection expression = ellipse(20817.501358, 29828.390686, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 07:07:22 2013] Writing source region out to fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 16 07:07:22 2013] Extracting stamp from image fullrun_mos2_xmm0671540501_pi300-10000_cl_sm2.00.img.gz, (202, 306) - (277, 381)
[Sun Jun 16 07:07:22 2013] XMMSAS bgd. selection expression = annulus(20817.501358, 29828.390686, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 07:07:22 2013] Writing fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10.gif
[Sun Jun 16 07:15:17 2013] Mean detx,y = (-2232.72, -7134.99) 
[Sun Jun 16 07:15:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 07:15:48 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 07:15:48 2013] Setting source spectrum file to fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 16 07:15:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 16 07:17:58 2013] Not generating rmf since there are only 31 counts
[Sun Jun 16 07:17:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 07:19:28 2013] Updating aperture counts using extracted products
[Sun Jun 16 07:19:28 2013] Total counts from fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 71.00
[Sun Jun 16 07:19:28 2013] Total counts from fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_bgd.pi.gz = 239.00
[Sun Jun 16 07:19:28 2013] Got source and background scale factors 917004.000000, 5413768.000000
[Sun Jun 16 07:19:28 2013] User source parameters:
  Position = (239.8, 343.4) = 9 46 22.98 9 56 48.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 30.5 +/- 9.5
  Background aperture counts = 40.5
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 07:19:28 2013] Updating counts from extracted products
[Sun Jun 16 07:19:28 2013] Set source signif. to 30.52/6.36 = 4.80
[Sun Jun 16 07:19:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 07:19:29 2013] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10.arf
[Sun Jun 16 07:19:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 07:19:29 2013] Updating source flux to 2.1e-14
[Sun Jun 16 07:19:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 07:19:33 2013] xmm0671540501/analysis//spectral/fullrun_mos2_xmm0671540501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete