[Sun Jun 16 02:57:22 2013] Detection parameters:
  Position = (281.4, 282.1) = 9 46 10.73 9 52 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.0 +/- 20.2
  Background counts = 11.5
  Rate = 0.01 +/- 0.001

[Sun Jun 16 02:57:22 2013] Off-axis axis estimate = 1.71'
[Sun Jun 16 03:56:56 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 03:56:56 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 16 03:56:56 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sun Jun 16 03:56:56 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jun 16 04:13:08 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 16 04:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 04:13:08 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 16 04:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 04:13:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 04:13:08 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 16 04:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 16 04:13:08 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 16 04:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 16 04:13:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671540501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 04:35:39 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.449438 pixels away
[Sun Jun 16 04:35:39 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 04:35:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 04:35:39 2013] Assessing source extent using major
[Sun Jun 16 04:35:39 2013] Source does appear to be extended
[Sun Jun 16 04:35:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 05:21:17 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 05:21:17 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 16 05:21:17 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sun Jun 16 05:21:17 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Jun 16 05:38:42 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 16 05:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 05:38:42 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 16 05:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 05:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:38:42 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 16 05:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 05:38:42 2013] fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 16 05:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 05:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0671540501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 05:59:56 2013] Spatial fit model total counts = 458.491000, observed total counts = 316.000000
[Sun Jun 16 05:59:56 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 05:59:56 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 05:59:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 05:59:56 2013] Assessing source extent using major
[Sun Jun 16 05:59:56 2013] Source does appear to be extended
[Sun Jun 16 05:59:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:56:24 2013] XMMSAS src. selection expression = ellipse(24437.603271, 24491.975616, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 06:56:24 2013] Writing source region out to fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 16 06:56:24 2013] Extracting stamp from image fullrun_mos1_xmm0671540501_pi300-10000_cl_sm2.00.img.gz, (244, 245) - (319, 320)
[Sun Jun 16 06:56:24 2013] XMMSAS bgd. selection expression = annulus(24437.603271, 24491.975616, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 06:56:24 2013] Writing fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5.gif
[Sun Jun 16 06:56:29 2013] Mean detx,y = (-572.63, 507.68) 
[Sun Jun 16 06:56:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 06:57:02 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 06:57:02 2013] Setting source spectrum file to fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 16 06:57:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 07:00:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 07:00:12 2013] rmf not generated due to insufficient counts
[Sun Jun 16 07:19:22 2013] Updating aperture counts using extracted products
[Sun Jun 16 07:19:22 2013] Total counts from fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 307.00
[Sun Jun 16 07:19:22 2013] Total counts from fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_bgd.pi.gz = 130.00
[Sun Jun 16 07:19:22 2013] Got source and background scale factors 1112354.000000, 2025789.000000
[Sun Jun 16 07:19:22 2013] User source parameters:
  Position = (281.4, 282.1) = 9 46 10.73 9 52 27.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 235.6 +/- 18.5
  Background aperture counts = 71.4
  Rate = 0.01 +/- 0.0008

[Sun Jun 16 07:19:22 2013] Updating counts from extracted products
[Sun Jun 16 07:19:22 2013] Set source signif. to 235.62/8.45 = 27.89
[Sun Jun 16 07:19:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 07:19:25 2013] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 07:19:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 07:19:25 2013] Updating source flux to 1.1e-13
[Sun Jun 16 07:19:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 07:19:32 2013] xmm0671540501/analysis//spectral/fullrun_mos1_xmm0671540501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete