[Sun May  5 04:17:58 2013] Detection parameters:
  Position = (494.4, 332.0) = 6 46 37.42 -44 15 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.6 +/- 18.2
  Background counts = 13.5
  Rate = 0.01 +/- 0.001

[Sun May  5 04:17:59 2013] Off-axis axis estimate = 14.41'
[Sun May  5 04:19:42 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Sun May  5 04:19:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 04:19:42 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Sun May  5 04:19:42 2013] source mask rpix=3.1, npix_max = 52, mask sum = 28, frac = 0.530
[Sun May  5 04:19:42 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.64"
[Sun May  5 06:06:12 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  5 06:06:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1.csv
[Sun May  5 06:06:12 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  5 06:06:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1.csv
[Sun May  5 06:06:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:06:12 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 06:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  5 06:06:12 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 06:06:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  5 06:06:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:49:31 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun May  5 06:49:31 2013] Vigneting correction estimate = 1.000000
[Sun May  5 06:49:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 06:49:31 2013] Assessing source extent using major
[Sun May  5 06:49:31 2013] Source does appear to be extended
[Sun May  5 06:49:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 06:49:31 2013] Source is confused with source 3
[Sun May  5 06:49:43 2013] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Sun May  5 06:49:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 06:49:43 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Sun May  5 06:49:43 2013] source mask rpix=3.1, npix_max = 52, mask sum = 28, frac = 0.530
[Sun May  5 06:49:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.64"
[Sun May  5 07:41:53 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  5 07:41:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1.csv
[Sun May  5 07:41:53 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  5 07:41:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1.csv
[Sun May  5 07:41:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:41:54 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 07:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May  5 07:41:54 2013] fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 07:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May  5 07:41:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 08:26:17 2013] Warning, spatial fit 1 centroid is now closest to src. 19
[Sun May  5 08:26:17 2013] Vigneting correction estimate = 1.000000
[Sun May  5 08:26:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 08:26:17 2013] Assessing source extent using major
[Sun May  5 08:26:17 2013] Source does appear to be extended
[Sun May  5 08:26:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 08:26:32 2013] XMMSAS src. selection expression = ellipse(42963.686157, 28837.225769, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 08:26:32 2013] Writing source region out to fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_src.reg
[Sun May  5 08:26:32 2013] Extracting stamp from image fullrun_pn_xmm0671241401_pi300-10000_cl_sm2.00.img.gz, (457, 295) - (532, 370)
[Sun May  5 08:26:32 2013] XMMSAS bgd. selection expression = annulus(42963.686157, 28837.225769, 1087.500000, 2175.000000, X, Y) && !ellipse(42994.853546, 28397.226349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41371.040283, 27707.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43072.478638, 27280.919281, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 08:26:32 2013] Writing fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1.gif
[Sun May  5 08:26:40 2013] Mean detx,y = (-15578.00, 10629.17) 
[Sun May  5 08:26:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 08:27:01 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 08:27:01 2013] Setting source spectrum file to fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May  5 08:27:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May  5 08:50:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 08:50:24 2013] rmf not generated due to insufficient counts
[Sun May  5 09:48:20 2013] Updating aperture counts using extracted products
[Sun May  5 09:48:20 2013] Total counts from fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 371.00
[Sun May  5 09:48:20 2013] Total counts from fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 181.00
[Sun May  5 09:48:20 2013] Got source and background scale factors 564733.000000, 2575234.000000
[Sun May  5 09:48:20 2013] User source parameters:
  Position = (494.4, 332.0) = 6 46 37.42 -44 15 28.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 331.3 +/- 20.3
  Background aperture counts = 39.7
  Rate = 0.02 +/- 0.001

[Sun May  5 09:48:20 2013] Updating counts from extracted products
[Sun May  5 09:48:20 2013] Set source signif. to 331.31/6.30 = 52.59
[Sun May  5 09:48:27 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 09:48:27 2013] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1.arf
[Sun May  5 09:48:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 09:48:28 2013] Getting flux using calc_pl_flux failed
[Sun May  5 09:48:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 09:48:45 2013] xmm0671241401/analysis//spectral/fullrun_pn_xmm0671241401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete