[Sat May 18 00:57:58 2013] Detection parameters:
  Position = (230.0, 392.1) = 6 48 22.78 -44 11 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2447.7 +/- 60.5
  Background counts = 18.0
  Rate = 0.2 +/- 0.004

[Sat May 18 00:58:00 2013] Off-axis axis estimate = 8.41'
[Sat May 18 01:00:15 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:00:15 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sat May 18 01:00:15 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.605
[Sat May 18 01:00:15 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.63"
[Sat May 18 02:23:49 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 18 02:23:49 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 18 02:23:49 2013] Fit fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_src4 appears to have run properly
[Sat May 18 02:23:50 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 18 02:23:50 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 18 02:23:50 2013] Fit fullrun_pn_xmm0671241001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat May 18 03:55:40 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.313692 pixels away
[Sat May 18 03:55:40 2013] Vigneting correction estimate = 1.000000
[Sat May 18 03:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 03:55:40 2013] Assessing source extent using major
[Sat May 18 03:55:40 2013] Source does appear to be extended
[Sat May 18 03:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 03:56:06 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sat May 18 03:56:06 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sat May 18 03:56:06 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.605
[Sat May 18 03:56:06 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.63"
[Sat May 18 05:12:32 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 18 05:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4.csv
[Sat May 18 05:12:32 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 18 05:12:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4.csv
[Sat May 18 05:12:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 05:12:33 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 18 05:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 18 05:12:33 2013] fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 18 05:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 18 05:12:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671241001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 06:34:14 2013] Spatial fit model total counts = 3723.660000, observed total counts = 2211.000000
[Sat May 18 06:34:14 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 06:34:14 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 37.665910 pixels away
[Sat May 18 06:34:14 2013] Vigneting correction estimate = 1.000000
[Sat May 18 06:34:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 06:34:14 2013] Assessing source extent using major
[Sat May 18 06:34:14 2013] Source does appear to be extended
[Sat May 18 06:34:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 06:34:29 2013] Counts = 2447.728271, rescaling region sizes by 2.000000
[Sat May 18 06:34:29 2013] XMMSAS src. selection expression = ellipse(19960.720749, 34065.867889, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 18 06:34:29 2013] Writing source region out to fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_src.reg
[Sat May 18 06:34:29 2013] Extracting stamp from image fullrun_pn_xmm0671241001_pi300-10000_cl_sm2.00.img.gz, (155, 317) - (305, 467)
[Sat May 18 06:34:29 2013] XMMSAS bgd. selection expression = annulus(19960.720749, 34065.867889, 4350.000000, 8700.000000, X, Y) && !ellipse(23864.905487, 25285.659454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25038.611633, 36497.856140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22708.415200, 27275.915000, 470.642414, 383.974411, 203.324000, X, Y) && !ellipse(25600.228000, 37128.444000, 234.807207, 234.807207, 0.000000, X, Y) && !ellipse(18113.328796, 34678.101715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22558.913900, 33668.021400, 540.472282, 540.472282, 0.000000, X, Y) && !ellipse(22005.839371, 29426.605103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17484.479800, 28797.871800, 363.376810, 363.376810, 0.000000, X, Y) && !ellipse(29249.456238, 28666.377289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28060.977509, 27193.770599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21958.054153, 26751.620605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18241.347360, 25587.442000, 282.408808, 282.408808, 0.000000, X, Y)
[Sat May 18 06:34:29 2013] Writing fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5.gif
[Sat May 18 06:42:11 2013] Mean detx,y = (8844.40, 3379.48) 
[Sat May 18 06:42:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 06:45:22 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 06:45:22 2013] Setting source spectrum file to fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 18 06:45:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May 18 07:05:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 07:05:11 2013] rmf not generated due to insufficient counts
[Sat May 18 08:16:48 2013] Updating aperture counts using extracted products
[Sat May 18 08:16:48 2013] Total counts from fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2580.00
[Sat May 18 08:16:48 2013] Total counts from fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 9347.00
[Sat May 18 08:16:48 2013] Got source and background scale factors 4598221.000000, 112637306.000000
[Sat May 18 08:16:48 2013] User source parameters:
  Position = (230.0, 392.1) = 6 48 22.78 -44 11 46.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2198.4 +/- 51.8
  Background aperture counts = 381.6
  Rate = 0.1 +/- 0.003

[Sat May 18 08:16:48 2013] Updating counts from extracted products
[Sat May 18 08:16:48 2013] Set source signif. to 2198.43/19.53 = 112.54
[Sat May 18 08:16:57 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 08:16:57 2013] Using photon index=1.80, rate=0.146, arf fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5.arf
[Sat May 18 08:16:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 08:16:57 2013] Updating source flux to 6.4e-13
[Sat May 18 08:17:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 08:17:16 2013] xmm0671241001/analysis//spectral/fullrun_pn_xmm0671241001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete