[Fri Jun 21 00:41:39 2013] Detection parameters:
  Position = (292.6, 276.2) = 13 47 15.35 17 27 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2434.6 +/- 58.1
  Background counts = 5.0
  Rate = 0.2 +/- 0.006

[Fri Jun 21 00:41:39 2013] Off-axis axis estimate = 1.67'
[Fri Jun 21 01:19:09 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:19:09 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 21 01:19:09 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Fri Jun 21 01:19:09 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 21 01:28:56 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 21 01:28:56 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 21 01:28:56 2013] Fit fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 21 01:28:56 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 21 01:28:56 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 21 01:28:56 2013] Fit fullrun_mos2_xmm0671150801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 21 01:29:04 2013] Spatial fit model total counts = 2259.210000, observed total counts = 2196.000000
[Fri Jun 21 01:29:04 2013] Offset between fit and detection position for source 1 = 0.135228 pixels
[Fri Jun 21 01:29:04 2013] 2255.636000 total counts/ 539.186000 bgd. counts: snr = 73.919982
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.135228 pixels
  Position = (292.6, 276.3) = 13 47 15.36 17 27 27.9
  Extent = 5.8 (5.5-6.2)" x 5.2 (4.9-5.5)", rotation angle = 340 (320-357) degrees
  Source counts = 1716.5 +/- 47.5
  Background counts = 539.2
  Rate = 0.2 +/- 0.004
[Fri Jun 21 01:29:04 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 01:29:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 01:29:04 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 01:29:04 2013] Source does appear to be extended
[Fri Jun 21 01:29:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Jun 21 01:51:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:51:38 2013] Initial guess for spatial extent in simple fitting = 5.53"
[Fri Jun 21 01:51:38 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.718
[Fri Jun 21 01:51:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Fri Jun 21 02:00:36 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 02:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 02:00:36 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 02:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 02:00:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 02:00:36 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 02:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 02:00:36 2013] fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 02:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 02:00:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671150801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 02:00:43 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Jun 21 02:00:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 02:00:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 02:00:43 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 02:00:43 2013] Source does appear to be extended
[Fri Jun 21 02:00:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Jun 21 02:33:14 2013] Counts = 1716.450000, rescaling region sizes by 2.000000
[Fri Jun 21 02:33:14 2013] XMMSAS src. selection expression = ellipse(25407.345800, 23990.692600, 699.770420, 626.630418, 340.313027, X, Y)
[Fri Jun 21 02:33:14 2013] Writing source region out to fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 02:33:14 2013] Extracting stamp from image fullrun_mos2_xmm0671150801_pi300-10000_cl_sm2.00.img.gz, (252, 236) - (333, 317)
[Fri Jun 21 02:33:14 2013] XMMSAS bgd. selection expression = annulus(25407.345800, 23990.692600, 2332.568067, 4665.136134, X, Y) && !ellipse(28073.384460, 22288.765930, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 02:33:14 2013] Writing fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 02:33:18 2013] Mean detx,y = (133.40, 59.92) 
[Fri Jun 21 02:33:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 02:34:35 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 02:34:36 2013] Setting source spectrum file to fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 02:34:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 02:44:50 2013] Updating aperture counts using extracted products
[Fri Jun 21 02:44:50 2013] Total counts from fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2149.00
[Fri Jun 21 02:44:50 2013] Total counts from fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 612.00
[Fri Jun 21 02:44:50 2013] Got source and background scale factors 1354664.000000, 23471986.000000
[Fri Jun 21 02:44:50 2013] User source parameters:
  Position = (292.6, 276.3) = 13 47 15.36 17 27 27.9
  Extent = 5.8 (5.5-6.2)" x 5.2 (4.9-5.5)", rotation angle = 340 (320-357) degrees
  Source aperture counts = 2113.7 +/- 47.4
  Background aperture counts = 35.3
  Rate = 0.2 +/- 0.004

[Fri Jun 21 02:44:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 02:44:51 2013] Using photon index=1.80, rate=0.162, arf fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 02:44:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 02:44:51 2013] Updating source flux to 2.1e-12
[Fri Jun 21 02:45:00 2013] xmm0671150801/analysis//spectral/fullrun_mos2_xmm0671150801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete