[Sat May 25 01:44:40 2013] Detection parameters:
  Position = (246.2, 329.7) = 5 36 23.59 -69 12 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.2 +/- 27.2
  Background counts = 324.0
  Rate = 0.003 +/- 0.0003

[Sat May 25 01:44:47 2013] Off-axis axis estimate = 4.42'
[Sat May 25 01:56:07 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat May 25 01:56:07 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat May 25 01:56:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.728
[Sat May 25 01:56:07 2013] Giving source the simple spatial ID 76 for pass 0, mean size = 8.64"
[Sat May 25 09:09:38 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76.ximg exists
[Sat May 25 09:09:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76.csv
[Sat May 25 09:09:38 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76_1.ximg exists
[Sat May 25 09:09:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76.csv
[Sat May 25 09:09:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:09:40 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Sat May 25 09:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Sat May 25 09:09:40 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Sat May 25 09:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76.csv
[Sat May 25 09:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671080101_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 18:47:16 2013] Spatial fit model total counts = 3943.960000, observed total counts = 2983.000000
[Sat May 25 18:47:16 2013] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 18:47:16 2013] Warning, spatial fit 76 centroid is now closest to src. 65
[Sat May 25 18:47:16 2013] Vigneting correction estimate = 1.000000
[Sat May 25 18:47:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 18:47:16 2013] Assessing source extent using major
[Sat May 25 18:47:16 2013] Source does appear to be extended
[Sat May 25 18:47:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 18:47:16 2013] Source is confused with source 14
[Sat May 25 18:48:09 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat May 25 18:48:09 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat May 25 18:48:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.728
[Sat May 25 18:48:09 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 8.64"
[Sun May 26 04:29:36 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72.ximg exists
[Sun May 26 04:29:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72.csv
[Sun May 26 04:29:36 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72_1.ximg exists
[Sun May 26 04:29:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72.csv
[Sun May 26 04:29:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 04:29:40 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sun May 26 04:29:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sun May 26 04:29:40 2013] fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sun May 26 04:29:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sun May 26 04:29:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671080101_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 16:44:19 2013] Spatial fit model total counts = 3689.520000, observed total counts = 3117.000000
[Sun May 26 16:44:19 2013] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 16:44:19 2013] Spatial fit model total counts = 3667.820000, observed total counts = 2916.000000
[Sun May 26 16:44:19 2013] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 16:44:19 2013] Spatial fit model total counts = 4452.530000, observed total counts = 3344.000000
[Sun May 26 16:44:19 2013] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 16:44:19 2013] Vigneting correction estimate = 1.000000
[Sun May 26 16:44:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 16:44:19 2013] Assessing source extent using major
[Sun May 26 16:44:19 2013] Source does appear to be extended
[Sun May 26 16:44:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 16:45:24 2013] XMMSAS src. selection expression = ellipse(21366.911880, 28636.890533, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 16:45:24 2013] Writing source region out to fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_src.reg
[Sun May 26 16:45:24 2013] Extracting stamp from image fullrun_pn_xmm0671080101_pi300-10000_cl_sm2.00.img.gz, (209, 292) - (284, 367)
[Sun May 26 16:45:25 2013] XMMSAS bgd. selection expression = annulus(21366.911880, 28636.890533, 1087.500000, 2175.000000, X, Y) && !ellipse(20948.702286, 28072.609192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21272.170000, 31791.440000, 1493.800043, 1493.800043, 0.000000, X, Y) && !ellipse(19894.460000, 30680.088000, 1535.464044, 1108.792032, 304.237000, X, Y) && !ellipse(19870.658000, 30673.968000, 2469.528071, 1398.536040, 136.998000, X, Y) && !ellipse(22096.435600, 28333.330000, 1172.576034, 591.272017, 90.289905, X, Y) && !ellipse(21806.299316, 27741.054443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18090.310200, 26758.981800, 1556.480045, 368.726411, 15.827400, X, Y) && !ellipse(18844.542160, 26558.687600, 1504.856043, 394.436811, 16.862200, X, Y) && !ellipse(19488.138860, 26387.099400, 1861.088054, 409.484812, 15.018300, X, Y) && !ellipse(20076.813600, 26242.378800, 1775.104051, 373.172011, 15.559000, X, Y) && !ellipse(21265.607400, 25934.653000, 1350.568039, 556.280816, 0.000000, X, Y) && !ellipse(22168.414000, 25706.953200, 1281.680037, 358.769610, 196.982000, X, Y) && !ellipse(21597.628000, 25839.546000, 2345.648067, 315.452009, 13.192700, X, Y) && !ellipse(23511.932000, 25342.360800, 1171.984034, 431.323212, 15.213000, X, Y) && !ellipse(22855.464600, 25522.732600, 1580.624045, 365.454411, 15.924700, X, Y) && !ellipse(23260.632000, 25413.939000, 1335.256038, 473.828814, 16.418300, X, Y) && !ellipse(21916.541800, 32378.999600, 2185.288063, 731.154421, 141.362700, X, Y) && !ellipse(20631.734000, 31449.196000, 1533.680044, 935.848027, 150.266400, X, Y) && !ellipse(21349.359482, 31015.321533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20908.518417, 31013.176270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21014.444794, 29345.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22154.183823, 28987.649109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19539.748596, 29367.822754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20163.478699, 28981.231903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20530.877670, 28883.218842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21016.389603, 28775.562714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23180.523895, 28483.801544, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 16:45:25 2013] Writing fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76.gif
[Sun May 26 21:01:16 2013] Mean detx,y = (-2622.62, 6532.88) 
[Sun May 26 21:01:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 21:01:42 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 21:01:43 2013] Setting source spectrum file to fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun May 26 21:01:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Mon May 27 00:35:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 00:35:41 2013] rmf not generated due to insufficient counts
[Mon May 27 09:19:10 2013] Updating aperture counts using extracted products
[Mon May 27 09:19:10 2013] Total counts from fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_src_b10.pi.gz = 2297.00
[Mon May 27 09:19:10 2013] Total counts from fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_bgd.pi.gz = 3356.00
[Mon May 27 09:19:10 2013] Got source and background scale factors 1042782.000000, 2692460.000000
[Mon May 27 09:19:10 2013] User source parameters:
  Position = (246.2, 329.7) = 5 36 23.59 -69 12 49.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 997.2 +/- 48.9
  Background aperture counts = 1299.8
  Rate = 0.01 +/- 0.0007

[Mon May 27 09:19:10 2013] Updating counts from extracted products
[Mon May 27 09:19:10 2013] Set source signif. to 997.23/36.05 = 27.66
[Mon May 27 09:19:39 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 09:19:39 2013] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76.arf
[Mon May 27 09:19:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 27 09:19:39 2013] Updating source flux to 1e-13
[Mon May 27 09:22:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 27 09:23:10 2013] xmm0671080101/analysis//spectral/fullrun_pn_xmm0671080101_pi300-10000_pass1_cl_src76_pl.csv not found, spectral fit skipped or did not complete