[Fri May 24 07:24:10 2013] Detection parameters:
  Position = (285.6, 278.9) = 18 9 50.89 -19 43 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3495.0 +/- 69.7
  Background counts = 13.8
  Rate = 0.2 +/- 0.003

[Fri May 24 07:24:10 2013] Off-axis axis estimate = 1.69'
[Fri May 24 08:10:19 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri May 24 08:10:19 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Fri May 24 08:10:19 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri May 24 08:10:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri May 24 08:22:49 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 24 08:22:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 08:22:49 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 24 08:22:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1.csv
[Fri May 24 08:22:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 08:22:49 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 24 08:22:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 08:22:49 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 24 08:22:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 24 08:22:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0671060101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 08:23:01 2013] Source 3 is offset by 7.318679 and 5.577224 pixels which is larger than
2 X fitted extent = 0.836299 x 0.836299, not incorporating fit results
[Fri May 24 08:23:01 2013] Vigneting correction estimate = 1.000000
[Fri May 24 08:23:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 08:23:01 2013] Assessing source extent using major
[Fri May 24 08:23:01 2013] Source does appear to be extended
[Fri May 24 08:23:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 08:49:55 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri May 24 08:49:55 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Fri May 24 08:49:55 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri May 24 08:49:55 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Fri May 24 09:03:16 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 24 09:03:16 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 24 09:03:16 2013] Fit fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 24 09:03:16 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 24 09:03:16 2013] fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 24 09:03:16 2013] Fit fullrun_mos2_xmm0671060101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 24 09:03:24 2013] Spatial fit model total counts = 3256.920000, observed total counts = 3146.000000
[Fri May 24 09:03:24 2013] Offset between fit and detection position for source 3 = 0.065130 pixels
[Fri May 24 09:03:24 2013] 3252.143000 total counts/ 823.953000 bgd. counts: snr = 84.592419
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.065130 pixels
  Position = (285.7, 278.8) = 18 9 50.89 -19 43 51.9
  Extent = 5.5 (5.2-5.7)" x 5.0 (4.8-5.2)", rotation angle = 19 (358-39) degrees
  Source counts = 2428.2 +/- 57.0
  Background counts = 824.0
  Rate = 0.1 +/- 0.003
[Fri May 24 09:03:24 2013] Vigneting correction estimate = 1.000000
[Fri May 24 09:03:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 09:03:24 2013] Assessing source extent using major axis lower bound
[Fri May 24 09:03:24 2013] Source does appear to be extended
[Fri May 24 09:03:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri May 24 09:31:57 2013] Counts = 2428.190000, rescaling region sizes by 2.000000
[Fri May 24 09:31:57 2013] XMMSAS src. selection expression = ellipse(24803.732400, 24209.604200, 655.040419, 600.994817, 18.612156, X, Y)
[Fri May 24 09:31:57 2013] Writing source region out to fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 24 09:31:57 2013] Extracting stamp from image fullrun_mos2_xmm0671060101_pi300-10000_cl_sm2.00.img.gz, (248, 241) - (323, 316)
[Fri May 24 09:31:57 2013] XMMSAS bgd. selection expression = annulus(24803.732400, 24209.604200, 2183.468063, 4366.936126, X, Y)
[Fri May 24 09:31:57 2013] Writing fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3.gif
[Fri May 24 09:31:59 2013] Mean detx,y = (169.86, 127.23) 
[Fri May 24 09:32:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 09:32:24 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 09:32:24 2013] Setting source spectrum file to fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 24 09:32:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 24 09:38:03 2013] Updating aperture counts using extracted products
[Fri May 24 09:38:03 2013] Total counts from fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 3024.00
[Fri May 24 09:38:03 2013] Total counts from fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 0.00
[Fri May 24 09:38:03 2013] Got source and background scale factors 1231624.000000, 0.000000
[Fri May 24 09:38:03 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May 24 09:38:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 09:38:03 2013] Using photon index=1.80, rate=0.107, arf fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3.arf
[Fri May 24 09:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 09:38:03 2013] Updating source flux to 2e-12
[Fri May 24 09:38:05 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri May 24 09:38:06 2013] xmm0671060101/analysis//spectral/fullrun_mos2_xmm0671060101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete