[Mon May 6 12:58:52 2013] Detection parameters: Position = (98.0, 266.0) = 19 22 44.20 21 52 11.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 55.1 +/- 10.9 Background counts = 16.4 Rate = 0.003 +/- 0.0007 [Mon May 6 12:58:52 2013] Off-axis axis estimate = 14.72' [Mon May 6 13:06:24 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting [Mon May 6 13:06:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 13:06:24 2013] Initial guess for spatial extent in simple fitting = 13.79" [Mon May 6 13:06:24 2013] source mask rpix=3.2, npix_max = 53, mask sum = 62, frac = 1.151 [Mon May 6 13:06:24 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.79" [Mon May 6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5.ximg exists [Mon May 6 13:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5.csv [Mon May 6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5_1.ximg exists [Mon May 6 13:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5.csv [Mon May 6 13:10:06 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Mon May 6 13:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon May 6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Mon May 6 13:10:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5.csv [Mon May 6 13:10:06 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 13:19:19 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.593697 pixels away [Mon May 6 13:19:19 2013] Vigneting correction estimate = 1.000000 [Mon May 6 13:19:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 13:19:19 2013] Assessing source extent using major [Mon May 6 13:19:19 2013] Source does appear to be extended [Mon May 6 13:19:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 13:25:07 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting [Mon May 6 13:25:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 13:25:07 2013] Initial guess for spatial extent in simple fitting = 13.79" [Mon May 6 13:25:07 2013] source mask rpix=3.2, npix_max = 53, mask sum = 62, frac = 1.151 [Mon May 6 13:25:07 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.79" [Mon May 6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5.ximg exists [Mon May 6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5.csv [Mon May 6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5_1.ximg exists [Mon May 6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5.csv [Mon May 6 13:28:54 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Mon May 6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon May 6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Mon May 6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5.csv [Mon May 6 13:28:54 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 13:37:35 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.593697 pixels away [Mon May 6 13:37:35 2013] Vigneting correction estimate = 1.000000 [Mon May 6 13:37:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 13:37:35 2013] Assessing source extent using major [Mon May 6 13:37:35 2013] Source does appear to be extended [Mon May 6 13:37:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 13:42:50 2013] XMMSAS src. selection expression = ellipse(8476.130005, 23097.702911, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 13:42:50 2013] Writing source region out to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_src.reg [Mon May 6 13:42:50 2013] Extracting stamp from image fullrun_mos1_xmm0670940101_pi300-10000_cl_sm2.00.img.gz, (60, 229) - (135, 304) [Mon May 6 13:42:50 2013] XMMSAS bgd. selection expression = annulus(8476.130005, 23097.702911, 1087.500000, 2175.000000, X, Y) [Mon May 6 13:42:50 2013] Writing fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4.gif [Mon May 6 13:43:49 2013] Mean detx,y = (-847.15, 16280.98) [Mon May 6 13:43:50 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 13:44:13 2013] Binned source spectrum to 10 counts/bin [Mon May 6 13:44:13 2013] Setting source spectrum file to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon May 6 13:44:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_bgd.pi.gz [Mon May 6 13:47:50 2013] Not generating rmf since there are only 55 counts [Mon May 6 13:47:50 2013] rmf not generated due to insufficient counts [Mon May 6 13:53:55 2013] Updating aperture counts using extracted products [Mon May 6 13:53:55 2013] Total counts from fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 140.00 [Mon May 6 13:53:55 2013] Total counts from fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 425.00 [Mon May 6 13:53:55 2013] Got source and background scale factors 1109174.000000, 4300200.000000 [Mon May 6 13:53:55 2013] User source parameters: Position = (98.0, 266.0) = 19 22 44.20 21 52 11.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 30.4 +/- 12.9 Background aperture counts = 109.6 Rate = 0.002 +/- 0.0008 [Mon May 6 13:53:55 2013] Updating counts from extracted products [Mon May 6 13:53:55 2013] Set source signif. to 30.38/10.47 = 2.90 [Mon May 6 13:53:55 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 13:53:55 2013] Using photon index=1.80, rate=0.00192, arf fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4.arf [Mon May 6 13:53:55 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 13:53:55 2013] Updating source flux to 6.8e-14 [Mon May 6 13:53:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 13:53:58 2013] xmm0670940101/analysis//spectral/fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete