[Mon May  6 12:58:52 2013] Detection parameters:
  Position = (218.6, 284.3) = 19 22 6.51 21 53 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.7 +/- 13.6
  Background counts = 25.9
  Rate = 0.008 +/- 0.001

[Mon May  6 12:58:52 2013] Off-axis axis estimate = 5.88'
[Mon May  6 13:06:24 2013] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Mon May  6 13:06:24 2013] Initial guess for spatial extent in simple fitting = 9.37"
[Mon May  6 13:06:24 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.852
[Mon May  6 13:06:24 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.37"
[Mon May  6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  6 13:10:06 2013] Fit fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon May  6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  6 13:10:06 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  6 13:10:06 2013] Fit fullrun_mos1_xmm0670940101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May  6 13:19:19 2013] Spatial fit model total counts = 265.317000, observed total counts = 265.000000
[Mon May  6 13:19:19 2013] Offset between fit and detection position for source 3 = 0.119355 pixels
[Mon May  6 13:19:19 2013] 262.616100 total counts/ 194.863000 bgd. counts: snr = 4.853606
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.119355 pixels
  Position = (218.6, 284.2) = 19 22 6.52 21 53 31.6
  Extent = 4.2 (3.3-5.4)" x 3.9 (3.1-5.1)", rotation angle = 90 (90-90) degrees
  Source counts = 67.8 +/- 16.2
  Background counts = 194.9
  Rate = 0.004 +/- 0.001
[Mon May  6 13:19:19 2013] Vigneting correction estimate = 1.000000
[Mon May  6 13:19:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 13:19:19 2013] Assessing source extent using major axis lower bound
[Mon May  6 13:19:19 2013] Source does appear to be extended
[Mon May  6 13:19:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64
[Mon May  6 13:25:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 13:25:07 2013] Initial guess for spatial extent in simple fitting = 4.04"
[Mon May  6 13:25:07 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.103
[Mon May  6 13:25:07 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.04"
[Mon May  6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3.ximg exists
[Mon May  6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3.csv
[Mon May  6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May  6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3.csv
[Mon May  6 13:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May  6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May  6 13:28:54 2013] fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May  6 13:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May  6 13:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670940101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 13:37:35 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Mon May  6 13:37:35 2013] Vigneting correction estimate = 1.000000
[Mon May  6 13:37:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 13:37:35 2013] Assessing source extent using major axis lower bound
[Mon May  6 13:37:35 2013] Source does appear to be extended
[Mon May  6 13:37:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64
[Mon May  6 13:42:50 2013] XMMSAS src. selection expression = ellipse(18967.209635, 24676.423402, 250.528786, 233.877903, 90.000000, X, Y)
[Mon May  6 13:42:50 2013] Writing source region out to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_src.reg
[Mon May  6 13:42:50 2013] Extracting stamp from image fullrun_mos1_xmm0670940101_pi300-10000_cl_sm2.00.img.gz, (204, 270) - (233, 299)
[Mon May  6 13:42:50 2013] XMMSAS bgd. selection expression = annulus(18967.209635, 24676.423402, 417.547977, 835.095954, X, Y)
[Mon May  6 13:42:50 2013] Writing fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3.gif
[Mon May  6 13:43:13 2013] Mean detx,y = (-1069.92, 5692.05) 
[Mon May  6 13:43:14 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 13:43:23 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 13:43:23 2013] Setting source spectrum file to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May  6 13:43:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May  6 13:47:31 2013] Not generating rmf since there are only 67 counts
[Mon May  6 13:47:31 2013] rmf not generated due to insufficient counts
[Mon May  6 13:53:55 2013] Updating aperture counts using extracted products
[Mon May  6 13:53:55 2013] Total counts from fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 86.00
[Mon May  6 13:53:55 2013] Total counts from fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 181.00
[Mon May  6 13:53:55 2013] Got source and background scale factors 187200.000000, 1488200.000000
[Mon May  6 13:53:55 2013] User source parameters:
  Position = (218.6, 284.2) = 19 22 6.52 21 53 31.6
  Extent = 4.2 (3.3-5.4)" x 3.9 (3.1-5.1)", rotation angle = 90 (90-90) degrees
  Source aperture counts = 63.2 +/- 10.3
  Background aperture counts = 22.8
  Rate = 0.004 +/- 0.0007

[Mon May  6 13:53:55 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 13:53:55 2013] Using photon index=1.80, rate=0.00428, arf fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3.arf
[Mon May  6 13:53:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 13:53:55 2013] Updating source flux to 1e-13
[Mon May  6 13:53:57 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May  6 13:53:58 2013] xmm0670940101/analysis//spectral/fullrun_mos1_xmm0670940101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete