[Mon Jun 17 08:55:28 2013] Detection parameters:
  Position = (207.7, 361.1) = 9 7 1.37 16 49 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 14.6
  Background counts = 29.7
  Rate = 0.004 +/- 0.0005

[Mon Jun 17 08:55:29 2013] Off-axis axis estimate = 8.00'
[Mon Jun 17 10:52:20 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 10:52:20 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Mon Jun 17 10:52:20 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Mon Jun 17 10:52:20 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.43"
[Mon Jun 17 12:15:11 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 17 12:15:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 12:15:11 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 17 12:15:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11.csv
[Mon Jun 17 12:15:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 12:15:11 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 17 12:15:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 12:15:11 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 17 12:15:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 17 12:15:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 13:32:12 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.110883 pixels away
[Mon Jun 17 13:32:12 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 13:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 13:32:12 2013] Assessing source extent using major
[Mon Jun 17 13:32:12 2013] Source does appear to be extended
[Mon Jun 17 13:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 15:22:31 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 15:22:31 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Mon Jun 17 15:22:31 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Mon Jun 17 15:22:31 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.43"
[Mon Jun 17 16:55:06 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 17 16:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11.csv
[Mon Jun 17 16:55:06 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 17 16:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11.csv
[Mon Jun 17 16:55:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 16:55:06 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 17 16:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 17 16:55:06 2013] fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 17 16:55:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 17 16:55:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 18:08:07 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.807991 pixels away
[Mon Jun 17 18:08:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 18:08:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 18:08:07 2013] Assessing source extent using major
[Mon Jun 17 18:08:07 2013] Source does appear to be extended
[Mon Jun 17 18:08:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 20:20:24 2013] XMMSAS src. selection expression = ellipse(18017.305679, 31363.709167, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 20:20:24 2013] Writing source region out to fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_src.reg
[Mon Jun 17 20:20:24 2013] Extracting stamp from image fullrun_mos1_xmm0670880501_pi300-10000_cl_sm2.00.img.gz, (170, 324) - (245, 399)
[Mon Jun 17 20:20:24 2013] XMMSAS bgd. selection expression = annulus(18017.305679, 31363.709167, 1087.500000, 2175.000000, X, Y) && !ellipse(21015.343400, 31801.118600, 1031.496030, 450.897613, 106.166078, X, Y) && !ellipse(19198.600600, 33215.569000, 509.632967, 509.632967, 0.000000, X, Y)
[Mon Jun 17 20:20:24 2013] Writing fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16.gif
[Mon Jun 17 20:23:59 2013] Mean detx,y = (6089.49, -7414.52) 
[Mon Jun 17 20:24:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 20:24:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 20:24:26 2013] Setting source spectrum file to fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jun 17 20:24:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Jun 17 20:48:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 20:48:00 2013] rmf not generated due to insufficient counts
[Mon Jun 17 21:53:47 2013] Updating aperture counts using extracted products
[Mon Jun 17 21:53:47 2013] Total counts from fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 251.00
[Mon Jun 17 21:53:47 2013] Total counts from fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_bgd.pi.gz = 1267.00
[Mon Jun 17 21:53:47 2013] Got source and background scale factors 1074778.000000, 9574350.000000
[Mon Jun 17 21:53:47 2013] User source parameters:
  Position = (207.7, 361.1) = 9 7 1.37 16 49 6.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 108.8 +/- 16.9
  Background aperture counts = 142.2
  Rate = 0.002 +/- 0.0003

[Mon Jun 17 21:53:47 2013] Updating counts from extracted products
[Mon Jun 17 21:53:47 2013] Set source signif. to 108.77/11.93 = 9.12
[Mon Jun 17 21:53:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 21:53:51 2013] Using photon index=1.80, rate=0.00181, arf fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16.arf
[Mon Jun 17 21:53:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 21:53:51 2013] Updating source flux to 3.4e-14
[Mon Jun 17 21:54:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 21:54:06 2013] xmm0670880501/analysis//spectral/fullrun_mos1_xmm0670880501_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete