[Wed May 29 15:43:51 2013] Detection parameters:
  Position = (329.8, 311.6) = 22 54 7.09 11 36 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.8 +/- 18.9
  Background counts = 70.9
  Rate = 0.003 +/- 0.0004

[Wed May 29 15:43:51 2013] Off-axis axis estimate = 2.47'
[Wed May 29 15:48:07 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May 29 15:48:07 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 29 15:48:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Wed May 29 15:48:07 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 7.66"
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61.csv
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61.csv
[Wed May 29 17:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 17:53:13 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed May 29 17:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 29 17:53:13 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed May 29 17:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 29 17:53:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:38 2013] Source 65 is offset by -7.030141 and 5.800674 pixels which is larger than
2 X fitted extent = 4.539729 x 4.747632, not incorporating fit results
[Wed May 29 20:24:38 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:38 2013] Assessing source extent using major
[Wed May 29 20:24:38 2013] Source does appear to be extended
[Wed May 29 20:24:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 20:25:11 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:25:11 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 29 20:25:11 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Wed May 29 20:25:11 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 7.66"
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56.csv
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56.csv
[Wed May 29 22:06:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:06:23 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed May 29 22:06:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed May 29 22:06:23 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed May 29 22:06:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed May 29 22:06:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:04 2013] Source 65 is offset by -7.055037 and 5.854605 pixels which is larger than
2 X fitted extent = 4.699540 x 4.981379, not incorporating fit results
[Thu May 30 00:32:04 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:04 2013] Assessing source extent using major
[Thu May 30 00:32:04 2013] Source does appear to be extended
[Thu May 30 00:32:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:32:39 2013] XMMSAS src. selection expression = ellipse(28647.109741, 27059.460632, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 00:32:39 2013] Writing source region out to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_src.reg
[Thu May 30 00:32:39 2013] Extracting stamp from image fullrun_pn_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (292, 274) - (367, 349)
[Thu May 30 00:32:39 2013] XMMSAS bgd. selection expression = annulus(28647.109741, 27059.460632, 1087.500000, 2175.000000, X, Y) && !ellipse(27637.432460, 26942.058000, 461.684813, 461.684813, 0.000000, X, Y) && !ellipse(27873.120911, 28187.691437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.494200, 24732.169200, 433.604812, 324.580009, 18.862000, X, Y) && !ellipse(27255.924835, 25989.319214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28889.212600, 25199.753600, 370.852011, 370.852011, 0.000000, X, Y) && !ellipse(26887.198600, 24710.571400, 594.204017, 594.204017, 0.000000, X, Y)
[Thu May 30 00:32:39 2013] Writing fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65.gif
[Thu May 30 01:58:13 2013] Mean detx,y = (787.40, -552.94) 
[Thu May 30 01:58:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 01:59:05 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 01:59:06 2013] Setting source spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu May 30 01:59:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Thu May 30 03:19:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 03:19:41 2013] rmf not generated due to insufficient counts
[Thu May 30 05:59:44 2013] Updating aperture counts using extracted products
[Thu May 30 05:59:44 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_src_b10.pi.gz = 1041.00
[Thu May 30 05:59:44 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_bgd.pi.gz = 2788.00
[Thu May 30 05:59:44 2013] Got source and background scale factors 1073358.000000, 6496846.000000
[Thu May 30 05:59:44 2013] User source parameters:
  Position = (329.8, 311.6) = 22 54 7.09 11 36 47.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 580.4 +/- 33.3
  Background aperture counts = 460.6
  Rate = 0.009 +/- 0.0005

[Thu May 30 05:59:44 2013] Updating counts from extracted products
[Thu May 30 05:59:44 2013] Set source signif. to 580.39/21.46 = 27.04
[Thu May 30 05:59:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 05:59:52 2013] Using photon index=1.80, rate=0.00938, arf fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65.arf
[Thu May 30 05:59:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 05:59:53 2013] Updating source flux to 2.8e-14
[Thu May 30 06:00:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:01:19 2013] xmm0670880401/analysis//spectral/fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete