[Wed May 29 15:43:49 2013] Detection parameters:
  Position = (279.6, 452.2) = 22 54 21.96 11 46 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.8 +/- 23.9
  Background counts = 62.6
  Rate = 0.005 +/- 0.0004

[Wed May 29 15:43:51 2013] Off-axis axis estimate = 11.23'
[Wed May 29 15:48:07 2013] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 15:48:07 2013] Initial guess for spatial extent in simple fitting = 12.05"
[Wed May 29 15:48:07 2013] source mask rpix=2.8, npix_max = 42, mask sum = 47, frac = 1.100
[Wed May 29 15:48:07 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.05"
[Wed May 29 17:53:11 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 29 17:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 17:53:11 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 29 17:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 17:53:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 17:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:38 2013] Warning, spatial fit 5 centroid is now closest to src. 14
[Wed May 29 20:24:38 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:38 2013] Assessing source extent using major
[Wed May 29 20:24:38 2013] Source does appear to be extended
[Wed May 29 20:24:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 20:25:11 2013] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:25:11 2013] Initial guess for spatial extent in simple fitting = 12.05"
[Wed May 29 20:25:11 2013] source mask rpix=2.8, npix_max = 42, mask sum = 47, frac = 1.100
[Wed May 29 20:25:11 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.05"
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5.csv
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5.csv
[Wed May 29 22:06:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 29 22:06:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 29 22:06:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:04 2013] Warning, spatial fit 5 centroid is now closest to src. 14
[Thu May 30 00:32:04 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:04 2013] Assessing source extent using major
[Thu May 30 00:32:04 2013] Source does appear to be extended
[Thu May 30 00:32:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:32:38 2013] XMMSAS src. selection expression = ellipse(24279.278564, 39295.840179, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 00:32:38 2013] Writing source region out to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_src.reg
[Thu May 30 00:32:38 2013] Extracting stamp from image fullrun_pn_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (242, 415) - (317, 490)
[Thu May 30 00:32:38 2013] XMMSAS bgd. selection expression = annulus(24279.278564, 39295.840179, 1087.500000, 2175.000000, X, Y) && !ellipse(25140.867432, 39264.784302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27190.958923, 37594.662018, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 00:32:38 2013] Writing fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5.gif
[Thu May 30 00:44:25 2013] Mean detx,y = (-8301.20, -9920.66) 
[Thu May 30 00:44:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 00:44:58 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 00:44:59 2013] Setting source spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 30 00:44:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 30 02:25:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 02:25:09 2013] rmf not generated due to insufficient counts
[Thu May 30 05:59:23 2013] Updating aperture counts using extracted products
[Thu May 30 05:59:23 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 676.00
[Thu May 30 05:59:23 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 2983.00
[Thu May 30 05:59:23 2013] Got source and background scale factors 1060294.000000, 9040127.000000
[Thu May 30 05:59:23 2013] User source parameters:
  Position = (279.6, 452.2) = 22 54 21.96 11 46 58.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 326.1 +/- 27.0
  Background aperture counts = 349.9
  Rate = 0.005 +/- 0.0004

[Thu May 30 05:59:23 2013] Updating counts from extracted products
[Thu May 30 05:59:23 2013] Set source signif. to 326.13/18.70 = 17.44
[Thu May 30 05:59:49 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 05:59:49 2013] Using photon index=1.80, rate=0.00527, arf fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5.arf
[Thu May 30 05:59:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 05:59:49 2013] Updating source flux to 3.9e-14
[Thu May 30 06:00:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:01:19 2013] xmm0670880401/analysis//spectral/fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete