[Wed May 29 15:43:50 2013] Detection parameters:
  Position = (406.2, 392.0) = 22 53 44.47 11 42 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.4 +/- 21.2
  Background counts = 61.7
  Rate = 0.004 +/- 0.0003

[Wed May 29 15:43:51 2013] Off-axis axis estimate = 10.35'
[Wed May 29 15:48:07 2013] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Wed May 29 15:48:07 2013] Initial guess for spatial extent in simple fitting = 11.60"
[Wed May 29 15:48:07 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Wed May 29 15:48:07 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.60"
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28.csv
[Wed May 29 17:53:12 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 29 17:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28.csv
[Wed May 29 17:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 17:53:13 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 29 17:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 29 17:53:13 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 29 17:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 29 17:53:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:38 2013] Source 30 is offset by 9.672936 and -2.029018 pixels which is larger than
2 X fitted extent = 1.333458 x 1.333458, not incorporating fit results
[Wed May 29 20:24:38 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:38 2013] Assessing source extent using major
[Wed May 29 20:24:38 2013] Source does appear to be extended
[Wed May 29 20:24:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 20:25:11 2013] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Wed May 29 20:25:11 2013] Initial guess for spatial extent in simple fitting = 11.60"
[Wed May 29 20:25:11 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.897
[Wed May 29 20:25:11 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 11.60"
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src26.ximg exists
[Wed May 29 22:06:22 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed May 29 22:06:22 2013] Fit fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_src26 appears to have run properly
[Wed May 29 22:06:23 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed May 29 22:06:23 2013] fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed May 29 22:06:23 2013] Fit fullrun_pn_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu May 30 00:32:04 2013] Spatial fit model total counts = 877.526000, observed total counts = 823.000000
[Thu May 30 00:32:04 2013] Offset between fit and detection position for source 30 = 0.182313 pixels
[Thu May 30 00:32:04 2013] 878.433000 total counts/ 727.547000 bgd. counts: snr = 5.593948
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.182313 pixels
  Position = (406.0, 391.9) = 22 53 44.52 11 42 33.7
  Extent = 6.7 (5.2-8.8)" x 4.3 (3.4-5.7)", rotation angle = 49 (10-69) degrees
  Source counts = 150.9 +/- 29.6
  Background counts = 727.5
  Rate = 0.002 +/- 0.0005
[Thu May 30 00:32:04 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:04 2013] Assessing source extent using major axis lower bound
[Thu May 30 00:32:04 2013] Source does appear to be extended
[Thu May 30 00:32:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Thu May 30 00:32:38 2013] XMMSAS src. selection expression = ellipse(35277.653420, 34043.801080, 403.511412, 257.889007, 48.623736, X, Y)
[Thu May 30 00:32:38 2013] Writing source region out to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_src.reg
[Thu May 30 00:32:38 2013] Extracting stamp from image fullrun_pn_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (383, 369) - (429, 415)
[Thu May 30 00:32:38 2013] XMMSAS bgd. selection expression = annulus(35277.653420, 34043.801080, 672.519019, 1345.038039, X, Y) && !ellipse(36957.646149, 32853.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36528.803162, 31985.806427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34933.563324, 32277.623352, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 00:32:38 2013] Writing fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30.gif
[Thu May 30 01:14:56 2013] Mean detx,y = (3943.69, -9876.85) 
[Thu May 30 01:15:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 01:15:38 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 01:15:39 2013] Setting source spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu May 30 01:15:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu May 30 05:59:32 2013] Updating aperture counts using extracted products
[Thu May 30 05:59:32 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 283.00
[Thu May 30 05:59:32 2013] Total counts from fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1102.00
[Thu May 30 05:59:32 2013] Got source and background scale factors 332800.000000, 3253273.000000
[Thu May 30 05:59:32 2013] User source parameters:
  Position = (406.0, 391.9) = 22 53 44.52 11 42 33.7
  Extent = 6.7 (5.2-8.8)" x 4.3 (3.4-5.7)", rotation angle = 49 (10-69) degrees
  Source aperture counts = 170.3 +/- 17.8
  Background aperture counts = 112.7
  Rate = 0.003 +/- 0.0003

[Thu May 30 05:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 05:59:50 2013] Using photon index=1.80, rate=0.00244, arf fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30.arf
[Thu May 30 05:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 05:59:51 2013] Updating source flux to 1.7e-14
[Thu May 30 06:00:47 2013] Flag b found in src. 30 procflags, skipping spectral fitting
[Thu May 30 06:01:19 2013] xmm0670880401/analysis//spectral/fullrun_pn_xmm0670880401_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete