[Wed May 29 15:44:55 2013] Detection parameters:
  Position = (226.9, 311.8) = 22 54 37.57 11 36 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 10.2
  Background counts = 19.4
  Rate = 0.001 +/- 0.0002

[Wed May 29 15:44:55 2013] Off-axis axis estimate = 5.28'
[Wed May 29 19:00:47 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 19:00:47 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Wed May 29 19:00:47 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Wed May 29 19:00:47 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 9.07"
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44.csv
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44.csv
[Wed May 29 20:24:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:23 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed May 29 20:24:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 29 20:24:23 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed May 29 20:24:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 29 20:24:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:56 2013] Source 42 is offset by -4.488021 and 7.111801 pixels which is larger than
2 X fitted extent = 1.042161 x 1.042161, not incorporating fit results
[Wed May 29 20:24:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:56 2013] Assessing source extent using major
[Wed May 29 20:24:56 2013] Source does appear to be extended
[Wed May 29 20:24:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 23:07:31 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 23:07:31 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Wed May 29 23:07:31 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Wed May 29 23:07:31 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 9.07"
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44.ximg exists
[Thu May 30 00:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44.csv
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu May 30 00:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44.csv
[Thu May 30 00:31:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu May 30 00:31:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu May 30 00:31:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 30 00:31:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:21 2013] Source 42 is offset by -4.195699 and 7.105433 pixels which is larger than
2 X fitted extent = 1.042161 x 1.042161, not incorporating fit results
[Thu May 30 00:32:21 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:21 2013] Assessing source extent using major
[Thu May 30 00:32:21 2013] Source does appear to be extended
[Thu May 30 00:32:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 04:45:20 2013] XMMSAS src. selection expression = ellipse(19691.024200, 27075.884644, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 04:45:20 2013] Writing source region out to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_src.reg
[Thu May 30 04:45:20 2013] Extracting stamp from image fullrun_mos2_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (189, 274) - (264, 349)
[Thu May 30 04:45:20 2013] XMMSAS bgd. selection expression = annulus(19691.024200, 27075.884644, 1087.500000, 2175.000000, X, Y)
[Thu May 30 04:45:20 2013] Writing fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42.gif
[Thu May 30 05:13:18 2013] Mean detx,y = (7311.74, -3284.98) 
[Thu May 30 05:13:21 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 05:14:06 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 05:14:06 2013] Setting source spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu May 30 05:14:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu May 30 05:49:31 2013] Not generating rmf since there are only 42 counts
[Thu May 30 05:49:31 2013] rmf not generated due to insufficient counts
[Thu May 30 06:00:21 2013] Updating aperture counts using extracted products
[Thu May 30 06:00:21 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 169.00
[Thu May 30 06:00:21 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_bgd.pi.gz = 1051.00
[Thu May 30 06:00:22 2013] Got source and background scale factors 1202802.000000, 10446943.000000
[Thu May 30 06:00:22 2013] User source parameters:
  Position = (226.9, 311.8) = 22 54 37.57 11 36 47.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48.0 +/- 14.0
  Background aperture counts = 121.0
  Rate = 0.0008 +/- 0.0002

[Thu May 30 06:00:22 2013] Updating counts from extracted products
[Thu May 30 06:00:22 2013] Set source signif. to 47.99/11.00 = 4.36
[Thu May 30 06:00:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:00:27 2013] Using photon index=1.80, rate=0.000756, arf fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42.arf
[Thu May 30 06:00:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:00:27 2013] Updating source flux to 1.2e-14
[Thu May 30 06:00:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:00:47 2013] xmm0670880401/analysis//spectral/fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete