[Wed May 29 15:44:55 2013] Detection parameters:
  Position = (390.3, 289.9) = 22 53 49.19 11 35 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.3 +/- 16.5
  Background counts = 21.5
  Rate = 0.003 +/- 0.0003

[Wed May 29 15:44:55 2013] Off-axis axis estimate = 6.69'
[Wed May 29 19:00:47 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed May 29 19:00:47 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Wed May 29 19:00:47 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.928
[Wed May 29 19:00:47 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.77"
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11.csv
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11.csv
[Wed May 29 20:24:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:23 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 29 20:24:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 20:24:23 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 29 20:24:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 20:24:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:56 2013] Source 21 is offset by -8.687693 and -4.161635 pixels which is larger than
2 X fitted extent = 1.123320 x 1.123320, not incorporating fit results
[Wed May 29 20:24:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:56 2013] Assessing source extent using major
[Wed May 29 20:24:56 2013] Source does appear to be extended
[Wed May 29 20:24:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 23:07:31 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed May 29 23:07:31 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Wed May 29 23:07:31 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.928
[Wed May 29 23:07:31 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.77"
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 30 00:31:49 2013] Fit fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 30 00:31:50 2013] Fit fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 30 00:32:21 2013] Spatial fit model total counts = 342.584000, observed total counts = 331.000000
[Thu May 30 00:32:21 2013] Offset between fit and detection position for source 21 = 0.064694 pixels
[Thu May 30 00:32:21 2013] 341.993000 total counts/ 230.724000 bgd. counts: snr = 7.325340
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.064694 pixels
  Position = (390.2, 289.9) = 22 53 49.21 11 35 10.1
  Extent = 4.2 (3.6-5.0)", rotation angle = 0
  Source counts = 111.3 +/- 18.5
  Background counts = 230.7
  Rate = 0.002 +/- 0.0003
[Thu May 30 00:32:21 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:21 2013] Assessing source extent using major axis lower bound
[Thu May 30 00:32:21 2013] Source does appear to be extended
[Thu May 30 00:32:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 04:45:19 2013] XMMSAS src. selection expression = ellipse(33902.202000, 25171.907600, 250.867807, 250.867807, 0.000000, X, Y)
[Thu May 30 04:45:19 2013] Writing source region out to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_src.reg
[Thu May 30 04:45:19 2013] Extracting stamp from image fullrun_mos2_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (376, 275) - (405, 304)
[Thu May 30 04:45:19 2013] XMMSAS bgd. selection expression = annulus(33902.202000, 25171.907600, 418.113012, 836.226024, X, Y)
[Thu May 30 04:45:19 2013] Writing fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21.gif
[Thu May 30 04:53:27 2013] Mean detx,y = (-6325.61, 1167.71) 
[Thu May 30 04:53:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 04:53:49 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 04:53:50 2013] Setting source spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu May 30 04:53:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu May 30 06:00:11 2013] Updating aperture counts using extracted products
[Thu May 30 06:00:12 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 133.00
[Thu May 30 06:00:12 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 183.00
[Thu May 30 06:00:12 2013] Got source and background scale factors 197792.000000, 1524970.000000
[Thu May 30 06:00:12 2013] User source parameters:
  Position = (390.2, 289.9) = 22 53 49.21 11 35 10.1
  Extent = 4.2 (3.6-5.0)", rotation angle = 0
  Source aperture counts = 109.3 +/- 12.6
  Background aperture counts = 23.7
  Rate = 0.002 +/- 0.0002

[Thu May 30 06:00:25 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:00:25 2013] Using photon index=1.80, rate=0.00175, arf fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21.arf
[Thu May 30 06:00:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:00:25 2013] Updating source flux to 3.3e-14
[Thu May 30 06:00:39 2013] Flag b found in src. 21 procflags, skipping spectral fitting
[Thu May 30 06:00:47 2013] xmm0670880401/analysis//spectral/fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete