[Wed May 29 15:44:54 2013] Detection parameters:
  Position = (363.9, 366.1) = 22 53 57.01 11 40 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.6 +/- 20.6
  Background counts = 25.5
  Rate = 0.006 +/- 0.0005

[Wed May 29 15:44:55 2013] Off-axis axis estimate = 6.82'
[Wed May 29 19:00:47 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Wed May 29 19:00:47 2013] Initial guess for spatial extent in simple fitting = 9.84"
[Wed May 29 19:00:47 2013] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.147
[Wed May 29 19:00:47 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.84"
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5.csv
[Wed May 29 20:24:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 20:24:22 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 29 20:24:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 29 20:24:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:56 2013] Warning, spatial fit 5 centroid is now closest to src. 19
[Wed May 29 20:24:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:56 2013] Assessing source extent using major
[Wed May 29 20:24:56 2013] Source does appear to be extended
[Wed May 29 20:24:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 23:07:31 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Wed May 29 23:07:31 2013] Initial guess for spatial extent in simple fitting = 9.84"
[Wed May 29 23:07:31 2013] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.147
[Wed May 29 23:07:31 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.84"
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 30 00:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5.csv
[Thu May 30 00:31:49 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 30 00:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5.csv
[Thu May 30 00:31:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 30 00:31:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 30 00:31:50 2013] fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 30 00:31:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 30 00:31:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:21 2013] Warning, spatial fit 5 centroid is now closest to src. 19
[Thu May 30 00:32:21 2013] Spatial fit model total counts = 334.632000, observed total counts = 290.000000
[Thu May 30 00:32:21 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 00:32:21 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:21 2013] Assessing source extent using major
[Thu May 30 00:32:21 2013] Source does appear to be extended
[Thu May 30 00:32:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 04:45:19 2013] XMMSAS src. selection expression = ellipse(31607.416962, 31800.904877, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 04:45:19 2013] Writing source region out to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_src.reg
[Thu May 30 04:45:19 2013] Extracting stamp from image fullrun_mos2_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (326, 329) - (401, 404)
[Thu May 30 04:45:19 2013] XMMSAS bgd. selection expression = annulus(31607.416962, 31800.904877, 1087.500000, 2175.000000, X, Y) && !ellipse(31287.525757, 32925.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30251.737762, 31416.281403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34288.668200, 32105.334600, 973.616028, 215.476806, 57.103617, X, Y) && !ellipse(32449.512604, 31184.051300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30193.820953, 31866.306213, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 04:45:19 2013] Writing fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10.gif
[Thu May 30 04:50:32 2013] Mean detx,y = (-1369.96, 6080.87) 
[Thu May 30 04:50:36 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 04:50:56 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 04:50:56 2013] Setting source spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 30 04:50:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 30 05:24:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 05:24:47 2013] rmf not generated due to insufficient counts
[Thu May 30 06:00:10 2013] Updating aperture counts using extracted products
[Thu May 30 06:00:10 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 380.00
[Thu May 30 06:00:10 2013] Total counts from fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 727.00
[Thu May 30 06:00:10 2013] Got source and background scale factors 1075502.000000, 5288104.000000
[Thu May 30 06:00:10 2013] User source parameters:
  Position = (363.9, 366.1) = 22 53 57.01 11 40 42.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 232.1 +/- 20.5
  Background aperture counts = 147.9
  Rate = 0.004 +/- 0.0003

[Thu May 30 06:00:10 2013] Updating counts from extracted products
[Thu May 30 06:00:10 2013] Set source signif. to 232.14/12.16 = 19.09
[Thu May 30 06:00:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:00:25 2013] Using photon index=1.80, rate=0.00366, arf fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10.arf
[Thu May 30 06:00:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:00:25 2013] Updating source flux to 5.9e-14
[Thu May 30 06:00:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:00:47 2013] xmm0670880401/analysis//spectral/fullrun_mos2_xmm0670880401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete