[Wed May 29 15:44:21 2013] Detection parameters:
  Position = (374.2, 359.2) = 22 53 53.97 11 40 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.8 +/- 11.4
  Background counts = 22.8
  Rate = 0.001 +/- 0.0002

[Wed May 29 15:44:22 2013] Off-axis axis estimate = 7.04'
[Wed May 29 17:53:13 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 17:53:13 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Wed May 29 17:53:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.159
[Wed May 29 17:53:13 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.95"
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31.csv
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31.csv
[Wed May 29 19:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed May 29 19:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:46 2013] Warning, spatial fit 31 centroid is now closest to src. 25
[Wed May 29 20:24:46 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:46 2013] Assessing source extent using major
[Wed May 29 20:24:46 2013] Source does appear to be extended
[Wed May 29 20:24:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 22:06:23 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:06:23 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Wed May 29 22:06:23 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.159
[Wed May 29 22:06:23 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 9.95"
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31.csv
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31.csv
[Wed May 29 23:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed May 29 23:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:12 2013] Warning, spatial fit 31 centroid is now closest to src. 25
[Thu May 30 00:32:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:12 2013] Assessing source extent using major
[Thu May 30 00:32:12 2013] Source does appear to be extended
[Thu May 30 00:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 03:44:40 2013] XMMSAS src. selection expression = ellipse(32502.684875, 31197.658325, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 03:44:40 2013] Writing source region out to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_src.reg
[Thu May 30 03:44:40 2013] Extracting stamp from image fullrun_mos1_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (337, 322) - (412, 397)
[Thu May 30 03:44:40 2013] XMMSAS bgd. selection expression = annulus(32502.684875, 31197.658325, 1087.500000, 2175.000000, X, Y) && !ellipse(31595.357819, 31763.365417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31255.617615, 32917.727020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30210.009320, 31426.310000, 349.520010, 349.520010, 0.000000, X, Y) && !ellipse(30189.822479, 31838.104492, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 03:44:40 2013] Writing fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28.gif
[Thu May 30 04:05:18 2013] Mean detx,y = (6154.97, 2255.36) 
[Thu May 30 04:05:20 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 04:05:42 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 04:05:42 2013] Setting source spectrum file to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu May 30 04:05:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu May 30 04:42:57 2013] Not generating rmf since there are only 64 counts
[Thu May 30 04:42:57 2013] rmf not generated due to insufficient counts
[Thu May 30 06:00:02 2013] Updating aperture counts using extracted products
[Thu May 30 06:00:03 2013] Total counts from fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 178.00
[Thu May 30 06:00:03 2013] Total counts from fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_bgd.pi.gz = 921.00
[Thu May 30 06:00:03 2013] Got source and background scale factors 1154754.000000, 7953824.000000
[Thu May 30 06:00:03 2013] User source parameters:
  Position = (374.2, 359.2) = 22 53 53.97 11 40 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44.3 +/- 14.4
  Background aperture counts = 133.7
  Rate = 0.0007 +/- 0.0002

[Thu May 30 06:00:03 2013] Updating counts from extracted products
[Thu May 30 06:00:03 2013] Set source signif. to 44.29/11.56 = 3.83
[Thu May 30 06:00:08 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:00:08 2013] Using photon index=1.80, rate=0.000698, arf fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28.arf
[Thu May 30 06:00:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:00:08 2013] Updating source flux to 9.7e-15
[Thu May 30 06:00:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:00:39 2013] xmm0670880401/analysis//spectral/fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete