[Wed May 29 15:44:21 2013] Detection parameters:
  Position = (359.8, 378.9) = 22 53 58.21 11 41 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.8 +/- 15.4
  Background counts = 22.2
  Rate = 0.003 +/- 0.0003

[Wed May 29 15:44:22 2013] Off-axis axis estimate = 7.34'
[Wed May 29 17:53:13 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 17:53:13 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Wed May 29 17:53:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Wed May 29 17:53:13 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.10"
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13.csv
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13.csv
[Wed May 29 19:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 29 19:00:46 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 29 19:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May 29 19:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 20:24:46 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.774444 pixels away
[Wed May 29 20:24:46 2013] Vigneting correction estimate = 1.000000
[Wed May 29 20:24:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 20:24:46 2013] Assessing source extent using major
[Wed May 29 20:24:46 2013] Source does appear to be extended
[Wed May 29 20:24:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 22:06:23 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 22:06:23 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Wed May 29 22:06:23 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Wed May 29 22:06:23 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.10"
[Wed May 29 23:07:30 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 29 23:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13.csv
[Wed May 29 23:07:30 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 29 23:07:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13.csv
[Wed May 29 23:07:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 29 23:07:31 2013] fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 29 23:07:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 29 23:07:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670880401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:32:12 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.774444 pixels away
[Thu May 30 00:32:12 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:32:12 2013] Assessing source extent using major
[Thu May 30 00:32:12 2013] Source does appear to be extended
[Thu May 30 00:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 03:44:39 2013] XMMSAS src. selection expression = ellipse(31255.617615, 32917.727020, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 03:44:39 2013] Writing source region out to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_src.reg
[Thu May 30 03:44:39 2013] Extracting stamp from image fullrun_mos1_xmm0670880401_pi300-10000_cl_sm2.00.img.gz, (322, 341) - (397, 416)
[Thu May 30 03:44:39 2013] XMMSAS bgd. selection expression = annulus(31255.617615, 32917.727020, 1087.500000, 2175.000000, X, Y) && !ellipse(31595.357819, 31763.365417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30210.009320, 31426.310000, 349.520010, 349.520010, 0.000000, X, Y) && !ellipse(28664.967468, 35335.824158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32502.684875, 31197.658325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30189.822479, 31838.104492, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 03:44:39 2013] Writing fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19.gif
[Thu May 30 03:54:23 2013] Mean detx,y = (7230.59, 443.05) 
[Thu May 30 03:54:28 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 03:55:05 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 03:55:06 2013] Setting source spectrum file to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 30 03:55:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 30 04:40:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 04:40:02 2013] rmf not generated due to insufficient counts
[Thu May 30 05:59:57 2013] Updating aperture counts using extracted products
[Thu May 30 05:59:57 2013] Total counts from fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 282.00
[Thu May 30 05:59:57 2013] Total counts from fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_bgd.pi.gz = 758.00
[Thu May 30 05:59:57 2013] Got source and background scale factors 1261936.000000, 6989498.000000
[Thu May 30 05:59:57 2013] User source parameters:
  Position = (359.8, 378.9) = 22 53 58.21 11 41 38.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 145.1 +/- 17.8
  Background aperture counts = 136.9
  Rate = 0.002 +/- 0.0003

[Thu May 30 05:59:57 2013] Updating counts from extracted products
[Thu May 30 05:59:57 2013] Set source signif. to 145.15/11.70 = 12.41
[Thu May 30 06:00:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:00:07 2013] Using photon index=1.80, rate=0.00229, arf fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19.arf
[Thu May 30 06:00:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:00:07 2013] Updating source flux to 3.3e-14
[Thu May 30 06:00:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 06:00:39 2013] xmm0670880401/analysis//spectral/fullrun_mos1_xmm0670880401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete