[Sun May 19 05:57:22 2013] Detection parameters:
  Position = (303.5, 181.7) = 7 2 34.06 -28 48 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 990.0 +/- 37.1
  Background counts = 104.9
  Rate = 0.01 +/- 0.0004

[Sun May 19 05:57:25 2013] Off-axis axis estimate = 8.47'
[Sun May 19 06:01:05 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:01:05 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Sun May 19 06:01:05 2013] source mask rpix=2.5, npix_max = 34, mask sum = 24, frac = 0.689
[Sun May 19 06:01:05 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.66"
[Sun May 19 09:45:59 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 19 09:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7.csv
[Sun May 19 09:45:59 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 19 09:45:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7.csv
[Sun May 19 09:45:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 09:46:00 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 19 09:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 09:46:00 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 19 09:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 19 09:46:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670870101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 10:38:43 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.478199 pixels away
[Sun May 19 10:38:43 2013] Vigneting correction estimate = 1.000000
[Sun May 19 10:38:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 10:38:43 2013] Assessing source extent using major
[Sun May 19 10:38:43 2013] Source does appear to be extended
[Sun May 19 10:38:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 10:39:07 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sun May 19 10:39:07 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Sun May 19 10:39:07 2013] source mask rpix=2.5, npix_max = 34, mask sum = 24, frac = 0.689
[Sun May 19 10:39:07 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.66"
[Sun May 19 13:10:51 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 19 13:10:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7.csv
[Sun May 19 13:10:51 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 19 13:10:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7.csv
[Sun May 19 13:10:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 13:10:52 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 19 13:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 19 13:10:52 2013] fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 19 13:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 19 13:10:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670870101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:02:46 2013] Source 7 is offset by -3.423725 and 0.023963 pixels which is larger than
2 X fitted extent = 1.225844 x 1.225844, not incorporating fit results
[Sun May 19 14:02:46 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:02:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:02:46 2013] Assessing source extent using major
[Sun May 19 14:02:46 2013] Source does appear to be extended
[Sun May 19 14:02:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:03:04 2013] XMMSAS src. selection expression = ellipse(26357.393890, 15759.541779, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 14:03:04 2013] Writing source region out to fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_src.reg
[Sun May 19 14:03:04 2013] Extracting stamp from image fullrun_pn_xmm0670870101_pi300-10000_cl_sm2.00.img.gz, (266, 144) - (341, 219)
[Sun May 19 14:03:04 2013] XMMSAS bgd. selection expression = annulus(26357.393890, 15759.541779, 1087.500000, 2175.000000, X, Y) && !ellipse(26172.869354, 13714.757690, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 14:03:04 2013] Writing fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7.gif
[Sun May 19 14:15:25 2013] Mean detx,y = (-1839.29, -8672.19) 
[Sun May 19 14:15:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 14:15:53 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 14:15:53 2013] Setting source spectrum file to fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 19 14:15:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 19 15:17:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 15:17:08 2013] rmf not generated due to insufficient counts
[Sun May 19 16:55:11 2013] Updating aperture counts using extracted products
[Sun May 19 16:55:11 2013] Total counts from fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 1252.00
[Sun May 19 16:55:11 2013] Total counts from fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 4202.00
[Sun May 19 16:55:11 2013] Got source and background scale factors 902668.000000, 8220776.000000
[Sun May 19 16:55:11 2013] User source parameters:
  Position = (303.5, 181.7) = 7 2 34.06 -28 48 57.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 790.6 +/- 36.4
  Background aperture counts = 461.4
  Rate = 0.009 +/- 0.0004

[Sun May 19 16:55:11 2013] Updating counts from extracted products
[Sun May 19 16:55:11 2013] Set source signif. to 790.61/21.48 = 36.81
[Sun May 19 16:55:41 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 16:55:41 2013] Using photon index=1.80, rate=0.00876, arf fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7.arf
[Sun May 19 16:55:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 16:55:41 2013] Updating source flux to 7.7e-12
[Sun May 19 16:56:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 16:56:14 2013] xmm0670870101/analysis//spectral/fullrun_pn_xmm0670870101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete