[Sat Aug 25 02:14:40 2012] Detection parameters:
  Position = (301.3, 269.9) = 1 8 1.09 -14 33 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1046.6 +/- 44.2
  Background counts = 431.3
  Rate = 0.01 +/- 0.0005

[Sat Aug 25 02:14:40 2012] Off-axis axis estimate = 2.08'
[Sat Aug 25 02:22:30 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 02:22:30 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Aug 25 02:22:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.610
[Sat Aug 25 02:22:30 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.47"
[Sat Aug 25 03:30:20 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35.ximg exists
[Sat Aug 25 03:30:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35.csv
[Sat Aug 25 03:30:20 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat Aug 25 03:30:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35.csv
[Sat Aug 25 03:30:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 03:30:21 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat Aug 25 03:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Aug 25 03:30:21 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Aug 25 03:30:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Aug 25 03:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 05:19:29 2012] Spatial fit model total counts = 2166.570000, observed total counts = 1724.000000
[Sat Aug 25 05:19:29 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 05:19:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 05:19:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 05:19:29 2012] Assessing source extent using major
[Sat Aug 25 05:19:29 2012] Source does appear to be extended
[Sat Aug 25 05:19:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 05:19:56 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 05:19:56 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Aug 25 05:19:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.610
[Sat Aug 25 05:19:56 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 7.47"
[Sat Aug 25 06:48:26 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34.ximg exists
[Sat Aug 25 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34.csv
[Sat Aug 25 06:48:26 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Aug 25 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34.csv
[Sat Aug 25 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 06:48:27 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Aug 25 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Aug 25 06:48:27 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Aug 25 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Aug 25 06:48:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 08:39:22 2012] Source 36 is offset by -6.478633 and -6.847894 pixels which is larger than
2 X fitted extent = 0.966005 x 0.858566, not incorporating fit results
[Sat Aug 25 08:39:22 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 25.315939 pixels away
[Sat Aug 25 08:39:22 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 08:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 08:39:22 2012] Assessing source extent using major
[Sat Aug 25 08:39:22 2012] Source does appear to be extended
[Sat Aug 25 08:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 08:39:50 2012] Counts = 1046.622803, rescaling region sizes by 2.000000
[Sat Aug 25 08:39:50 2012] XMMSAS src. selection expression = ellipse(26161.412903, 23429.353241, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug 25 08:39:50 2012] Writing source region out to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36_src.reg
[Sat Aug 25 08:39:50 2012] Extracting stamp from image fullrun_pn_xmm0670750101_pi300-10000_cl_sm2.00.img.gz, (226, 195) - (376, 345)
[Sat Aug 25 08:39:51 2012] XMMSAS bgd. selection expression = annulus(26161.412903, 23429.353241, 4350.000000, 8700.000000, X, Y) && !ellipse(26201.734833, 32695.527618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16699.252228, 32382.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.911224, 32060.343719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20178.664139, 31818.316559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21586.814682, 31089.176483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.156200, 30834.051200, 1411.056041, 1411.056041, 0.000000, X, Y) && !ellipse(25554.560400, 30423.897600, 421.431212, 421.431212, 0.000000, X, Y) && !ellipse(35342.552002, 30232.873779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27327.469200, 30395.074000, 378.665611, 378.665611, 0.000000, X, Y) && !ellipse(22377.945709, 30240.708771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25067.923000, 29445.713000, 392.793611, 392.793611, 0.000000, X, Y) && !ellipse(22124.966553, 29298.433563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17782.887833, 28638.762329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28740.619873, 26671.605988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.176636, 26438.258118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18101.544449, 26343.640839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19757.944214, 25909.232910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24091.176200, 24957.661800, 308.600809, 308.600809, 0.000000, X, Y) && !ellipse(19573.073196, 24992.724762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32478.492249, 24767.498627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20073.252838, 23074.580261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24389.804340, 23072.153200, 431.950975, 431.950975, 0.000000, X, Y) && !ellipse(21615.745209, 22334.514740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16800.906662, 22164.343292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.582520, 20572.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33871.920654, 18849.766220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26497.056396, 18894.170258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18799.728210, 18585.115555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19708.013733, 14557.002014, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 08:39:51 2012] Writing fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36.gif
[Sat Aug 25 09:20:59 2012] Mean detx,y = (-2527.38, -409.24) 
[Sat Aug 25 09:21:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 09:23:15 2012] grppha failed
[Sat Aug 25 09:23:15 2012] Setting source spectrum file to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36_src.pi.gz
[Sat Aug 25 09:23:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Aug 25 09:45:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 09:45:17 2012] rmf not generated due to insufficient counts
[Sat Aug 25 10:30:18 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:30:18 2012] Error reading totcts from fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36_src.pi.gz
[Sat Aug 25 10:30:20 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 10:30:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 10:30:31 2012] xmm0670750101/analysis//spectral/fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete