[Sat Aug 25 02:14:39 2012] Detection parameters:
  Position = (389.7, 378.0) = 1 7 34.60 -14 25 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.2 +/- 33.0
  Background counts = 372.5
  Rate = 0.002 +/- 0.0003

[Sat Aug 25 02:14:40 2012] Off-axis axis estimate = 8.78'
[Sat Aug 25 02:22:30 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 02:22:30 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Sat Aug 25 02:22:30 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Sat Aug 25 02:22:30 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.82"
[Sat Aug 25 03:30:20 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Aug 25 03:30:20 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Aug 25 03:30:20 2012] Fit fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat Aug 25 03:30:21 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 25 03:30:21 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 25 03:30:21 2012] Fit fullrun_pn_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Aug 25 05:19:29 2012] Source 10 is offset by 3.666385 and -8.966221 pixels which is larger than
2 X fitted extent = 1.259071 x 1.259071, not incorporating fit results
[Sat Aug 25 05:19:29 2012] Spatial fit model total counts = 1457.040000, observed total counts = 1344.000000
[Sat Aug 25 05:19:29 2012] Offset between fit and detection position for source 10 = 0.432136 pixels
[Sat Aug 25 05:19:29 2012] 1455.614000 total counts/ 1329.100000 bgd. counts: snr = 3.470242
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.432136 pixels
  Position = (389.3, 377.9) = 1 7 34.73 -14 25 19.2
  Extent = 4.6 (3.6-6.1)", rotation angle = 0
  Source counts = 126.5 +/- 38.2
  Background counts = 1329.1
  Rate = 0.002 +/- 0.0005
[Sat Aug 25 05:19:29 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 05:19:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 05:19:29 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 05:19:29 2012] Source does appear to be extended
[Sat Aug 25 05:19:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 05:19:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 05:19:56 2012] Initial guess for spatial extent in simple fitting = 4.61"
[Sat Aug 25 05:19:56 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.924
[Sat Aug 25 05:19:56 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.61"
[Sat Aug 25 06:48:26 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Aug 25 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10.csv
[Sat Aug 25 06:48:26 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Aug 25 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10.csv
[Sat Aug 25 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 06:48:27 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 25 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 25 06:48:27 2012] fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 25 06:48:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 25 06:48:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 08:39:22 2012] Spatial fit model total counts = 1474.790000, observed total counts = 1323.000000
[Sat Aug 25 08:39:22 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 08:39:22 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 08:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 08:39:22 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 08:39:22 2012] Source does appear to be extended
[Sat Aug 25 08:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 08:39:50 2012] XMMSAS src. selection expression = ellipse(33821.295400, 32831.386200, 276.865808, 276.865808, 0.000000, X, Y)
[Sat Aug 25 08:39:50 2012] Writing source region out to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10_src.reg
[Sat Aug 25 08:39:50 2012] Extracting stamp from image fullrun_pn_xmm0670750101_pi300-10000_cl_sm2.00.img.gz, (373, 362) - (405, 394)
[Sat Aug 25 08:39:50 2012] XMMSAS bgd. selection expression = annulus(33821.295400, 32831.386200, 461.443013, 922.886027, X, Y) && !ellipse(32670.349976, 34420.250580, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 08:39:50 2012] Writing fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10.gif
[Sat Aug 25 08:50:36 2012] Mean detx,y = (-4433.74, 11414.75) 
[Sat Aug 25 08:50:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 08:50:54 2012] grppha failed
[Sat Aug 25 08:50:54 2012] Setting source spectrum file to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 08:50:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Aug 25 10:30:16 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:30:17 2012] Error reading totcts from fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 10:30:20 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 10:30:30 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Aug 25 10:30:30 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Sat Aug 25 10:30:30 2012] Source 10 has no response, skipping
[Sat Aug 25 10:30:31 2012] xmm0670750101/analysis//spectral/fullrun_pn_xmm0670750101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete