[Sat Aug 25 02:15:04 2012] Detection parameters:
  Position = (140.4, 378.2) = 1 8 49.26 -14 25 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.6 +/- 26.1
  Background counts = 112.2
  Rate = 0.002 +/- 0.0002

[Sat Aug 25 02:15:04 2012] Off-axis axis estimate = 12.83'
[Sat Aug 25 03:30:21 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 03:30:21 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sat Aug 25 03:30:21 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Sat Aug 25 03:30:21 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.85"
[Sat Aug 25 04:12:55 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Aug 25 04:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 25 04:12:55 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Aug 25 04:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 25 04:12:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 04:12:55 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Aug 25 04:12:55 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Aug 25 04:12:55 2012] Fit fullrun_mos1_xmm0670750101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Aug 25 05:19:35 2012] Warning, spatial fit 13 centroid is now closest to src. 16
[Sat Aug 25 05:19:35 2012] Source 13 is offset by -5.437500 and -1.932104 pixels which is larger than
2 X fitted extent = 1.498630 x 1.498630, not incorporating fit results
[Sat Aug 25 05:19:35 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 05:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 05:19:35 2012] Assessing source extent using major
[Sat Aug 25 05:19:35 2012] Source does appear to be extended
[Sat Aug 25 05:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 06:48:27 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 06:48:27 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sat Aug 25 06:48:27 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Sat Aug 25 06:48:27 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.85"
[Sat Aug 25 07:35:27 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Aug 25 07:35:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 25 07:35:27 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Aug 25 07:35:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 25 07:35:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 07:35:28 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Aug 25 07:35:28 2012] fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Aug 25 07:35:28 2012] Fit fullrun_mos1_xmm0670750101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Aug 25 08:39:28 2012] Warning, spatial fit 13 centroid is now closest to src. 17
[Sat Aug 25 08:39:28 2012] Source 13 is offset by -5.249431 and -1.314104 pixels which is larger than
2 X fitted extent = 1.441320 x 1.441320, not incorporating fit results
[Sat Aug 25 08:39:28 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.699443 pixels away
[Sat Aug 25 08:39:28 2012] Spatial fit model total counts = 3907.960000, observed total counts = 3452.000000
[Sat Aug 25 08:39:28 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 08:39:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 08:39:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 08:39:28 2012] Assessing source extent using major
[Sat Aug 25 08:39:28 2012] Source does appear to be extended
[Sat Aug 25 08:39:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 09:45:20 2012] XMMSAS src. selection expression = ellipse(12166.137512, 32852.030975, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 09:45:20 2012] Writing source region out to fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13_src.reg
[Sat Aug 25 09:45:20 2012] Extracting stamp from image fullrun_mos1_xmm0670750101_pi300-10000_cl_sm2.00.img.gz, (103, 341) - (178, 416)
[Sat Aug 25 09:45:20 2012] XMMSAS bgd. selection expression = annulus(12166.137512, 32852.030975, 1087.500000, 2175.000000, X, Y) && !ellipse(13650.768829, 33910.726562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11426.707870, 30809.501007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11216.926000, 34266.020000, 2103.304061, 2103.304061, 0.000000, X, Y)
[Sat Aug 25 09:45:20 2012] Writing fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13.gif
[Sat Aug 25 09:49:35 2012] Mean detx,y = (-464.89, 13986.18) 
[Sat Aug 25 09:49:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 09:49:51 2012] grppha failed
[Sat Aug 25 09:49:51 2012] Setting source spectrum file to fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13_src.pi.gz
[Sat Aug 25 09:49:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Aug 25 09:59:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 09:59:36 2012] rmf not generated due to insufficient counts
[Sat Aug 25 10:30:20 2012] Updating aperture counts using extracted products
[Sat Aug 25 10:30:20 2012] Error reading totcts from fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13_src.pi.gz
[Sat Aug 25 10:30:22 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 10:30:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 10:30:29 2012] xmm0670750101/analysis//spectral/fullrun_mos1_xmm0670750101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete