[Wed May 15 05:18:02 2013] Detection parameters:
  Position = (278.1, 344.9) = 15 11 54.01 56 27 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.1 +/- 16.6
  Background counts = 12.4
  Rate = 0.009 +/- 0.0009

[Wed May 15 05:18:03 2013] Off-axis axis estimate = 3.68'
[Wed May 15 05:18:23 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:23 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Wed May 15 05:18:23 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Wed May 15 05:18:23 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.27"
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 15 05:18:24 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 15 05:18:24 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May 15 05:18:42 2013] Spatial fit model total counts = 273.989000, observed total counts = 274.000000
[Wed May 15 05:18:42 2013] Offset between fit and detection position for source 4 = 0.110757 pixels
[Wed May 15 05:18:42 2013] 272.489600 total counts/ 177.729000 bgd. counts: snr = 7.108020
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.110757 pixels
  Position = (278.0, 344.9) = 15 11 54.07 56 27 17.3
  Extent = 4.3 (3.6-5.3)", rotation angle = 0
  Source counts = 94.8 +/- 16.5
  Background counts = 177.7
  Rate = 0.005 +/- 0.0009
[Wed May 15 05:18:42 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:18:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:18:42 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:18:42 2013] Source does appear to be extended
[Wed May 15 05:18:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:18:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:58 2013] Initial guess for spatial extent in simple fitting = 4.32"
[Wed May 15 05:18:58 2013] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.674
[Wed May 15 05:18:58 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.32"
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 15 05:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5.csv
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 15 05:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5.csv
[Wed May 15 05:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 15 05:18:59 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 15 05:19:17 2013] Spatial fit model total counts = 278.000000, observed total counts = 278.000000
[Wed May 15 05:19:17 2013] Offset between fit and detection position for source 4 = 0.003933 pixels
[Wed May 15 05:19:17 2013] 277.201900 total counts/ 182.734000 bgd. counts: snr = 6.988349
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.003933 pixels
  Position = (278.0, 344.9) = 15 11 54.07 56 27 17.3
  Extent = 4.3 (3.5-5.4)", rotation angle = 0
  Source counts = 94.5 +/- 16.6
  Background counts = 182.7
  Rate = 0.005 +/- 0.0009
[Wed May 15 05:19:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:19:17 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:19:17 2013] Source does appear to be extended
[Wed May 15 05:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:43:18 2013] XMMSAS src. selection expression = ellipse(24138.041966, 29956.709620, 257.590247, 257.590247, 0.000000, X, Y)
[Wed May 15 05:43:18 2013] Writing source region out to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_src.reg
[Wed May 15 05:43:18 2013] Extracting stamp from image fullrun_mos2_xmm0670650401_pi300-10000_cl_sm2.00.img.gz, (263, 330) - (293, 360)
[Wed May 15 05:43:18 2013] XMMSAS bgd. selection expression = annulus(24138.041966, 29956.709620, 429.317079, 858.634157, X, Y) && !ellipse(24041.520691, 31358.117676, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 05:43:18 2013] Writing fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4.gif
[Wed May 15 05:44:22 2013] Mean detx,y = (-2855.45, 127.05) 
[Wed May 15 05:44:24 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 05:44:35 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 05:44:35 2013] Setting source spectrum file to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 15 05:44:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 15 06:00:45 2013] Not generating rmf since there are only 94 counts
[Wed May 15 06:00:45 2013] rmf not generated due to insufficient counts
[Wed May 15 06:07:26 2013] Updating aperture counts using extracted products
[Wed May 15 06:07:26 2013] Total counts from fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 114.00
[Wed May 15 06:07:26 2013] Total counts from fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 121.00
[Wed May 15 06:07:26 2013] Got source and background scale factors 208780.000000, 1515200.000000
[Wed May 15 06:07:26 2013] User source parameters:
  Position = (278.0, 344.9) = 15 11 54.07 56 27 17.3
  Extent = 4.3 (3.5-5.4)", rotation angle = 0
  Source aperture counts = 97.3 +/- 11.7
  Background aperture counts = 16.7
  Rate = 0.005 +/- 0.0006

[Wed May 15 06:07:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 06:07:29 2013] Using photon index=1.80, rate=0.00504, arf fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4.arf
[Wed May 15 06:07:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 06:07:29 2013] Updating source flux to 6.3e-14
[Wed May 15 06:07:36 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 06:07:42 2013] xmm0670650401/analysis//spectral/fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete