[Wed May 15 05:18:02 2013] Detection parameters:
  Position = (276.7, 376.3) = 15 11 54.76 56 29 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.8 +/- 15.0
  Background counts = 13.2
  Rate = 0.009 +/- 0.0009

[Wed May 15 05:18:03 2013] Off-axis axis estimate = 5.86'
[Wed May 15 05:18:23 2013] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:23 2013] Initial guess for spatial extent in simple fitting = 9.36"
[Wed May 15 05:18:23 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.889
[Wed May 15 05:18:23 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.36"
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 15 05:18:24 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 15 05:18:24 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 15 05:18:24 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed May 15 05:18:42 2013] Spatial fit model total counts = 246.999000, observed total counts = 247.000000
[Wed May 15 05:18:42 2013] Offset between fit and detection position for source 3 = 0.213030 pixels
[Wed May 15 05:18:42 2013] 247.492000 total counts/ 162.868000 bgd. counts: snr = 6.630949
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.213030 pixels
  Position = (276.6, 376.4) = 15 11 54.84 56 29 34.5
  Extent = 3.7 (3.1-4.6)", rotation angle = 0
  Source counts = 84.6 +/- 15.7
  Background counts = 162.9
  Rate = 0.005 +/- 0.0008
[Wed May 15 05:18:42 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:18:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:18:42 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:18:42 2013] Source does appear to be extended
[Wed May 15 05:18:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:18:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:58 2013] Initial guess for spatial extent in simple fitting = 3.69"
[Wed May 15 05:18:58 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.239
[Wed May 15 05:18:58 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 3.69"
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6.ximg exists
[Wed May 15 05:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6.csv
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May 15 05:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6.csv
[Wed May 15 05:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May 15 05:18:59 2013] fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May 15 05:18:59 2013] Fit fullrun_mos2_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed May 15 05:19:17 2013] Spatial fit model total counts = 247.000000, observed total counts = 247.000000
[Wed May 15 05:19:17 2013] Offset between fit and detection position for source 3 = 0.003451 pixels
[Wed May 15 05:19:17 2013] 247.504700 total counts/ 163.327000 bgd. counts: snr = 6.586703
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003451 pixels
  Position = (276.6, 376.4) = 15 11 54.84 56 29 34.4
  Extent = 3.6 (3.1-4.6)", rotation angle = 0
  Source counts = 84.2 +/- 15.7
  Background counts = 163.3
  Rate = 0.004 +/- 0.0008
[Wed May 15 05:19:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:19:17 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:19:17 2013] Source does appear to be extended
[Wed May 15 05:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:43:18 2013] XMMSAS src. selection expression = ellipse(24012.314800, 32698.894600, 218.422806, 218.422806, 0.000000, X, Y)
[Wed May 15 05:43:18 2013] Writing source region out to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_src.reg
[Wed May 15 05:43:18 2013] Extracting stamp from image fullrun_mos2_xmm0670650401_pi300-10000_cl_sm2.00.img.gz, (264, 364) - (289, 389)
[Wed May 15 05:43:18 2013] XMMSAS bgd. selection expression = annulus(24012.314800, 32698.894600, 364.038010, 728.076021, X, Y) && !ellipse(24041.520691, 31358.117676, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 05:43:18 2013] Writing fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3.gif
[Wed May 15 05:44:39 2013] Mean detx,y = (-5604.69, 249.91) 
[Wed May 15 05:44:40 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 05:44:47 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 05:44:48 2013] Setting source spectrum file to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 15 05:44:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 15 06:00:50 2013] Not generating rmf since there are only 84 counts
[Wed May 15 06:00:50 2013] rmf not generated due to insufficient counts
[Wed May 15 06:07:26 2013] Updating aperture counts using extracted products
[Wed May 15 06:07:26 2013] Total counts from fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 96.00
[Wed May 15 06:07:26 2013] Total counts from fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 82.00
[Wed May 15 06:07:26 2013] Got source and background scale factors 150400.000000, 1094400.000000
[Wed May 15 06:07:26 2013] User source parameters:
  Position = (276.6, 376.4) = 15 11 54.84 56 29 34.4
  Extent = 3.6 (3.1-4.6)", rotation angle = 0
  Source aperture counts = 84.7 +/- 10.8
  Background aperture counts = 11.3
  Rate = 0.005 +/- 0.0006

[Wed May 15 06:07:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 06:07:29 2013] Using photon index=1.80, rate=0.00449, arf fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3.arf
[Wed May 15 06:07:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 06:07:29 2013] Updating source flux to 8.4e-14
[Wed May 15 06:07:36 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 06:07:42 2013] xmm0670650401/analysis//spectral/fullrun_mos2_xmm0670650401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete