[Wed May 15 05:18:01 2013] Detection parameters:
  Position = (326.2, 151.1) = 15 11 28.86 56 13 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.5 +/- 19.6
  Background counts = 11.0
  Rate = 0.01 +/- 0.001

[Wed May 15 05:18:02 2013] Off-axis axis estimate = 10.87'
[Wed May 15 05:18:22 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 05:18:22 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Wed May 15 05:18:22 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.864
[Wed May 15 05:18:22 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.86"
[Wed May 15 05:18:23 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 15 05:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3.csv
[Wed May 15 05:18:23 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 15 05:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3.csv
[Wed May 15 05:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 05:18:23 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 15 05:18:23 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 15 05:18:23 2013] Fit fullrun_mos1_xmm0670650401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 15 05:18:37 2013] Spatial fit model total counts = 311.955000, observed total counts = 312.000000
[Wed May 15 05:18:37 2013] Offset between fit and detection position for source 1 = 0.091626 pixels
[Wed May 15 05:18:37 2013] 310.699000 total counts/ 132.750000 bgd. counts: snr = 15.444658
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091626 pixels
  Position = (326.2, 151.2) = 15 11 28.86 56 13 14.8
  Extent = 7.4 (6.3-8.4)", rotation angle = 0
  Source counts = 177.9 +/- 17.6
  Background counts = 132.8
  Rate = 0.009 +/- 0.0009
[Wed May 15 05:18:37 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:18:37 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:18:37 2013] Source does appear to be extended
[Wed May 15 05:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:18:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 05:18:57 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed May 15 05:18:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed May 15 05:18:57 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.38"
[Wed May 15 05:18:57 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 15 05:18:57 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 15 05:18:57 2013] Fit fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 15 05:18:58 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 15 05:18:58 2013] fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 15 05:18:58 2013] Fit fullrun_mos1_xmm0670650401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 15 05:19:12 2013] Spatial fit model total counts = 296.999000, observed total counts = 297.000000
[Wed May 15 05:19:12 2013] Offset between fit and detection position for source 1 = 0.034069 pixels
[Wed May 15 05:19:12 2013] 296.770000 total counts/ 118.257000 bgd. counts: snr = 16.415587
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034069 pixels
  Position = (326.2, 151.2) = 15 11 28.87 56 13 14.9
  Extent = 7.4 (6.3-8.4)", rotation angle = 0
  Source counts = 178.5 +/- 17.2
  Background counts = 118.3
  Rate = 0.009 +/- 0.0009
[Wed May 15 05:19:12 2013] Vigneting correction estimate = 1.000000
[Wed May 15 05:19:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 05:19:12 2013] Assessing source extent using major axis lower bound
[Wed May 15 05:19:12 2013] Source does appear to be extended
[Wed May 15 05:19:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:30:49 2013] XMMSAS src. selection expression = ellipse(28330.491720, 13107.607200, 444.840013, 444.840013, 0.000000, X, Y)
[Wed May 15 05:30:49 2013] Writing source region out to fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_src.reg
[Wed May 15 05:30:49 2013] Extracting stamp from image fullrun_mos1_xmm0670650401_pi300-10000_cl_sm2.00.img.gz, (301, 126) - (352, 177)
[Wed May 15 05:30:49 2013] XMMSAS bgd. selection expression = annulus(28330.491720, 13107.607200, 741.400021, 1482.800043, X, Y)
[Wed May 15 05:30:49 2013] Writing fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1.gif
[Wed May 15 05:31:31 2013] Mean detx,y = (-3694.81, -14193.58) 
[Wed May 15 05:31:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 05:31:41 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 05:31:41 2013] Setting source spectrum file to fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 15 05:31:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 15 06:07:20 2013] Updating aperture counts using extracted products
[Wed May 15 06:07:20 2013] Total counts from fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 216.00
[Wed May 15 06:07:20 2013] Total counts from fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 309.00
[Wed May 15 06:07:20 2013] Got source and background scale factors 619200.000000, 5100524.000000
[Wed May 15 06:07:21 2013] User source parameters:
  Position = (326.2, 151.2) = 15 11 28.87 56 13 14.9
  Extent = 7.4 (6.3-8.4)", rotation angle = 0
  Source aperture counts = 178.5 +/- 15.7
  Background aperture counts = 37.5
  Rate = 0.009 +/- 0.0008

[Wed May 15 06:07:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 06:07:24 2013] Using photon index=1.80, rate=0.0095, arf fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1.arf
[Wed May 15 06:07:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 06:07:24 2013] Updating source flux to 2.8e-13
[Wed May 15 06:07:36 2013] xmm0670650401/analysis//spectral/fullrun_mos1_xmm0670650401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete