[Tue Jun 25 03:04:32 2013] Detection parameters:
  Position = (231.8, 349.1) = 15 23 58.32 -38 19 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.9 +/- 15.7
  Background counts = 85.6
  Rate = 0.004 +/- 0.0007

[Tue Jun 25 03:04:32 2013] Off-axis axis estimate = 6.07'
[Tue Jun 25 03:07:50 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 03:07:50 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Jun 25 03:07:50 2013] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.698
[Tue Jun 25 03:07:50 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.46"
[Tue Jun 25 03:57:38 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jun 25 03:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18.csv
[Tue Jun 25 03:57:38 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jun 25 03:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18.csv
[Tue Jun 25 03:57:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 03:57:38 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jun 25 03:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Jun 25 03:57:38 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jun 25 03:57:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Jun 25 03:57:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:48:56 2013] Warning, spatial fit 18 centroid is now closest to src. 17
[Tue Jun 25 04:48:56 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 04:48:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 04:48:56 2013] Assessing source extent using major
[Tue Jun 25 04:48:56 2013] Source does appear to be extended
[Tue Jun 25 04:48:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 04:49:12 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:49:12 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Jun 25 04:49:12 2013] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.698
[Tue Jun 25 04:49:12 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.46"
[Tue Jun 25 05:31:48 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jun 25 05:31:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18.csv
[Tue Jun 25 05:31:48 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jun 25 05:31:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18.csv
[Tue Jun 25 05:31:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 05:31:49 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jun 25 05:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jun 25 05:31:49 2013] fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jun 25 05:31:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jun 25 05:31:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:22:28 2013] Source 18 is offset by -5.821366 and 6.738053 pixels which is larger than
2 X fitted extent = 6.095770 x 1.087766, not incorporating fit results
[Tue Jun 25 06:22:28 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:22:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:22:28 2013] Assessing source extent using major
[Tue Jun 25 06:22:28 2013] Source does appear to be extended
[Tue Jun 25 06:22:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 06:22:50 2013] XMMSAS src. selection expression = ellipse(20116.677170, 30323.476654, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 06:22:50 2013] Writing source region out to fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_src.reg
[Tue Jun 25 06:22:50 2013] Extracting stamp from image fullrun_pn_xmm0670580101_pi300-10000_cl_sm2.00.img.gz, (194, 312) - (269, 387)
[Tue Jun 25 06:22:50 2013] XMMSAS bgd. selection expression = annulus(20116.677170, 30323.476654, 1087.500000, 2175.000000, X, Y) && !ellipse(20601.289047, 30767.057709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20109.732000, 31000.953000, 438.144813, 320.532009, 91.119720, X, Y) && !ellipse(22180.067703, 28174.756134, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 06:22:50 2013] Writing fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18.gif
[Tue Jun 25 06:40:25 2013] Mean detx,y = (-5675.59, -4214.01) 
[Tue Jun 25 06:40:27 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 06:40:43 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 06:40:43 2013] Setting source spectrum file to fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun 25 06:40:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jun 25 07:05:50 2013] Not generating rmf since there are only 90 counts
[Tue Jun 25 07:05:50 2013] rmf not generated due to insufficient counts
[Tue Jun 25 07:40:56 2013] Updating aperture counts using extracted products
[Tue Jun 25 07:40:56 2013] Total counts from fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 610.00
[Tue Jun 25 07:40:56 2013] Total counts from fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3471.00
[Tue Jun 25 07:40:56 2013] Got source and background scale factors 1037235.000000, 9247425.000000
[Tue Jun 25 07:40:56 2013] User source parameters:
  Position = (231.8, 349.1) = 15 23 58.32 -38 19 23.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 220.7 +/- 25.7
  Background aperture counts = 389.3
  Rate = 0.005 +/- 0.0006

[Tue Jun 25 07:40:56 2013] Updating counts from extracted products
[Tue Jun 25 07:40:56 2013] Set source signif. to 220.68/19.73 = 11.18
[Tue Jun 25 07:40:59 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 07:40:59 2013] Using photon index=1.80, rate=0.00548, arf fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18.arf
[Tue Jun 25 07:40:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 07:40:59 2013] Updating source flux to 3e-14
[Tue Jun 25 07:41:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 07:41:13 2013] xmm0670580101/analysis//spectral/fullrun_pn_xmm0670580101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete