[Tue Jun 25 03:05:16 2013] Detection parameters:
  Position = (273.4, 224.1) = 15 23 42.94 -38 28 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.0 +/- 13.6
  Background counts = 21.8
  Rate = 0.003 +/- 0.0005

[Tue Jun 25 03:05:16 2013] Off-axis axis estimate = 5.69'
[Tue Jun 25 04:20:44 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:20:44 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Tue Jun 25 04:20:44 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Tue Jun 25 04:20:44 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.27"
[Tue Jun 25 04:48:49 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jun 25 04:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7.csv
[Tue Jun 25 04:48:49 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jun 25 04:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7.csv
[Tue Jun 25 04:48:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:48:49 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jun 25 04:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jun 25 04:48:49 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jun 25 04:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jun 25 04:48:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670580101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:49:03 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.410964 pixels away
[Tue Jun 25 04:49:03 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 04:49:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 04:49:03 2013] Assessing source extent using major
[Tue Jun 25 04:49:03 2013] Source does appear to be extended
[Tue Jun 25 04:49:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 05:53:44 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 05:53:44 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Tue Jun 25 05:53:44 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Tue Jun 25 05:53:44 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.27"
[Tue Jun 25 06:22:21 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jun 25 06:22:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7.csv
[Tue Jun 25 06:22:21 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jun 25 06:22:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7.csv
[Tue Jun 25 06:22:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:22:21 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jun 25 06:22:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 25 06:22:21 2013] fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jun 25 06:22:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Jun 25 06:22:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670580101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:22:40 2013] Source 21 is offset by 0.705554 and -8.695603 pixels which is larger than
2 X fitted extent = 1.065646 x 1.065646, not incorporating fit results
[Tue Jun 25 06:22:40 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:22:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:22:40 2013] Assessing source extent using major
[Tue Jun 25 06:22:40 2013] Source does appear to be extended
[Tue Jun 25 06:22:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 07:26:55 2013] XMMSAS src. selection expression = ellipse(23740.296997, 19449.408569, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 25 07:26:55 2013] Writing source region out to fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_src.reg
[Tue Jun 25 07:26:55 2013] Extracting stamp from image fullrun_mos2_xmm0670580101_pi300-10000_cl_sm2.00.img.gz, (236, 187) - (311, 262)
[Tue Jun 25 07:26:55 2013] XMMSAS bgd. selection expression = annulus(23740.296997, 19449.408569, 1087.500000, 2175.000000, X, Y)
[Tue Jun 25 07:26:55 2013] Writing fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21.gif
[Tue Jun 25 07:32:49 2013] Mean detx,y = (4710.14, -7496.47) 
[Tue Jun 25 07:32:50 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 07:33:01 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 07:33:01 2013] Setting source spectrum file to fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 25 07:33:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jun 25 07:38:12 2013] Not generating rmf since there are only 98 counts
[Tue Jun 25 07:38:12 2013] rmf not generated due to insufficient counts
[Tue Jun 25 07:41:03 2013] Updating aperture counts using extracted products
[Tue Jun 25 07:41:03 2013] Total counts from fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 251.00
[Tue Jun 25 07:41:03 2013] Total counts from fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1144.00
[Tue Jun 25 07:41:03 2013] Got source and background scale factors 1321144.000000, 10135479.000000
[Tue Jun 25 07:41:03 2013] User source parameters:
  Position = (273.4, 224.1) = 15 23 42.94 -38 28 27.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.9 +/- 16.9
  Background aperture counts = 149.1
  Rate = 0.002 +/- 0.0004

[Tue Jun 25 07:41:03 2013] Updating counts from extracted products
[Tue Jun 25 07:41:03 2013] Set source signif. to 101.88/12.21 = 8.34
[Tue Jun 25 07:41:05 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 07:41:05 2013] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21.arf
[Tue Jun 25 07:41:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 07:41:05 2013] Updating source flux to 3.9e-14
[Tue Jun 25 07:41:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 07:41:09 2013] xmm0670580101/analysis//spectral/fullrun_mos2_xmm0670580101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete