[Sat Jun 1 07:46:30 2013] Detection parameters: Position = (277.9, 288.5) = 20 17 29.51 37 18 31.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 718.0 +/- 34.5 Background counts = 18.0 Rate = 0.03 +/- 0.002 [Sat Jun 1 07:46:30 2013] Off-axis axis estimate = 1.65' [Sat Jun 1 08:39:52 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 08:39:52 2013] Initial guess for spatial extent in simple fitting = 7.26" [Sat Jun 1 08:39:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.691 [Sat Jun 1 08:39:52 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26" [Sat Jun 1 08:59:23 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1.ximg exists [Sat Jun 1 08:59:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1.csv [Sat Jun 1 08:59:23 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Jun 1 08:59:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1.csv [Sat Jun 1 08:59:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 08:59:23 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Jun 1 08:59:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1.csv [Sat Jun 1 08:59:23 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Jun 1 08:59:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1.csv [Sat Jun 1 08:59:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670480601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 09:42:06 2013] Source 2 is offset by -6.792423 and 6.188999 pixels which is larger than 2 X fitted extent = 0.834023 x 0.834023, not incorporating fit results [Sat Jun 1 09:42:06 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 09:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 09:42:06 2013] Assessing source extent using major [Sat Jun 1 09:42:06 2013] Source does appear to be extended [Sat Jun 1 09:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 10:21:52 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 10:21:52 2013] Initial guess for spatial extent in simple fitting = 7.26" [Sat Jun 1 10:21:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.691 [Sat Jun 1 10:21:52 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26" [Sat Jun 1 10:41:11 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1.ximg exists [Sat Jun 1 10:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1.csv [Sat Jun 1 10:41:11 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Jun 1 10:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1.csv [Sat Jun 1 10:41:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 10:41:11 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Jun 1 10:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1.csv [Sat Jun 1 10:41:11 2013] fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Jun 1 10:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1.csv [Sat Jun 1 10:41:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0670480601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 11:19:37 2013] Source 2 is offset by -6.792423 and 6.188999 pixels which is larger than 2 X fitted extent = 0.834023 x 0.834023, not incorporating fit results [Sat Jun 1 11:19:37 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 11:19:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 11:19:37 2013] Assessing source extent using major [Sat Jun 1 11:19:37 2013] Source does appear to be extended [Sat Jun 1 11:19:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 11:57:30 2013] XMMSAS src. selection expression = ellipse(24127.039185, 25052.462921, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 11:57:30 2013] Writing source region out to fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_src.reg [Sat Jun 1 11:57:30 2013] Extracting stamp from image fullrun_mos1_xmm0670480601_pi300-10000_cl_sm2.00.img.gz, (240, 251) - (315, 326) [Sat Jun 1 11:57:30 2013] XMMSAS bgd. selection expression = annulus(24127.039185, 25052.462921, 1087.500000, 2175.000000, X, Y) && !ellipse(26632.212600, 25182.641800, 509.492815, 193.908806, 307.287286, X, Y) [Sat Jun 1 11:57:30 2013] Writing fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2.gif [Sat Jun 1 11:57:34 2013] Mean detx,y = (249.71, -239.83) [Sat Jun 1 11:57:36 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 11:57:46 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 11:57:46 2013] Setting source spectrum file to fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Jun 1 11:57:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat Jun 1 12:01:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 12:01:48 2013] rmf not generated due to insufficient counts [Sat Jun 1 12:21:39 2013] Updating aperture counts using extracted products [Sat Jun 1 12:21:39 2013] Total counts from fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 687.00 [Sat Jun 1 12:21:39 2013] Total counts from fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1136.00 [Sat Jun 1 12:21:39 2013] Got source and background scale factors 1269236.000000, 10823512.000000 [Sat Jun 1 12:21:39 2013] User source parameters: Position = (277.9, 288.5) = 20 17 29.51 37 18 31.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 553.8 +/- 27.2 Background aperture counts = 133.2 Rate = 0.02 +/- 0.001 [Sat Jun 1 12:21:39 2013] Updating counts from extracted products [Sat Jun 1 12:21:39 2013] Set source signif. to 553.79/11.54 = 47.98 [Sat Jun 1 12:21:42 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 12:21:42 2013] Using photon index=1.80, rate=0.0214, arf fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2.arf [Sat Jun 1 12:21:42 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 12:21:42 2013] Updating source flux to 3.7e-13 [Sat Jun 1 12:21:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 12:21:51 2013] xmm0670480601/analysis//spectral/fullrun_mos1_xmm0670480601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete