[Sat Jun  8 03:23:34 2013] Detection parameters:
  Position = (521.2, 217.6) = 12 37 58.03 -16 15 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.0 +/- 8.7
  Background counts = 14.4
  Rate = 0.003 +/- 0.0006

[Sat Jun  8 03:23:35 2013] Off-axis axis estimate = 17.18'
[Sat Jun  8 03:25:57 2013] Using EEF radius (= 15.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:25:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 03:25:57 2013] Initial guess for spatial extent in simple fitting = 15.02"
[Sat Jun  8 03:25:57 2013] source mask rpix=3.5, npix_max = 62, mask sum = 32, frac = 0.512
[Sat Jun  8 03:25:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 15.02"
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5.csv
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5.csv
[Sat Jun  8 04:05:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun  8 04:05:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 04:42:21 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.496616 pixels away
[Sat Jun  8 04:42:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 04:42:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 04:42:21 2013] Assessing source extent using major
[Sat Jun  8 04:42:21 2013] Source does appear to be extended
[Sat Jun  8 04:42:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 04:42:39 2013] Using EEF radius (= 15.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 04:42:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 04:42:39 2013] Initial guess for spatial extent in simple fitting = 15.02"
[Sat Jun  8 04:42:39 2013] source mask rpix=3.5, npix_max = 62, mask sum = 32, frac = 0.512
[Sat Jun  8 04:42:39 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 15.02"
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5.csv
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5.csv
[Sat Jun  8 05:16:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun  8 05:16:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:47:26 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.325270 pixels away
[Sat Jun  8 05:47:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:47:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:47:26 2013] Assessing source extent using major
[Sat Jun  8 05:47:26 2013] Source does appear to be extended
[Sat Jun  8 05:47:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 05:47:43 2013] XMMSAS src. selection expression = ellipse(45291.828247, 18881.817734, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 05:47:43 2013] Writing source region out to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun  8 05:47:43 2013] Extracting stamp from image fullrun_pn_xmm0670390301_pi300-10000_cl_sm2.00.img.gz, (484, 180) - (559, 255)
[Sat Jun  8 05:47:43 2013] XMMSAS bgd. selection expression = annulus(45291.828247, 18881.817734, 1087.500000, 2175.000000, X, Y) && !ellipse(43057.655609, 17471.856461, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 05:47:43 2013] Writing fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5.gif
[Sat Jun  8 05:52:22 2013] Mean detx,y = (-15031.81, -13383.90) 
[Sat Jun  8 05:52:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 05:52:57 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 05:52:58 2013] Setting source spectrum file to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  8 05:52:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun  8 06:13:10 2013] Not generating rmf since there are only 39 counts
[Sat Jun  8 06:13:10 2013] rmf not generated due to insufficient counts
[Sat Jun  8 06:34:37 2013] Updating aperture counts using extracted products
[Sat Jun  8 06:34:37 2013] Total counts from fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 79.00
[Sat Jun  8 06:34:37 2013] Total counts from fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 411.00
[Sat Jun  8 06:34:37 2013] Got source and background scale factors 596254.000000, 4717679.000000
[Sat Jun  8 06:34:37 2013] User source parameters:
  Position = (521.2, 217.6) = 12 37 58.03 -16 15 4.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.1 +/- 9.9
  Background aperture counts = 51.9
  Rate = 0.002 +/- 0.0007

[Sat Jun  8 06:34:37 2013] Updating counts from extracted products
[Sat Jun  8 06:34:37 2013] Set source signif. to 27.05/7.21 = 3.75
[Sat Jun  8 06:34:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 06:34:42 2013] Using photon index=1.80, rate=0.0018, arf fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5.arf
[Sat Jun  8 06:34:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 06:34:42 2013] Getting flux using calc_pl_flux failed
[Sat Jun  8 06:34:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 06:34:52 2013] xmm0670390301/analysis//spectral/fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete