[Sat Jun  8 03:23:35 2013] Detection parameters:
  Position = (226.5, 350.8) = 12 39 27.03 -16 5 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.1 +/- 12.1
  Background counts = 18.2
  Rate = 0.008 +/- 0.001

[Sat Jun  8 03:23:35 2013] Off-axis axis estimate = 6.45'
[Sat Jun  8 03:25:57 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:25:57 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Sat Jun  8 03:25:57 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845
[Sat Jun  8 03:25:57 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.65"
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun  8 04:05:46 2013] Fit fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_src17 appears to have run properly
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun  8 04:05:46 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun  8 04:05:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun  8 04:05:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 04:42:21 2013] Spatial fit model total counts = 261.233000, observed total counts = 240.000000
[Sat Jun  8 04:42:21 2013] Offset between fit and detection position for source 17 = 0.214607 pixels
[Sat Jun  8 04:42:21 2013] 260.949600 total counts/ 206.953000 bgd. counts: snr = 3.753449
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.214607 pixels
  Position = (226.7, 350.7) = 12 39 26.97 -16 5 18.5
  Extent = 6.1 (3.6-9.4)" x 5.7 (3.8-9.0)", rotation angle = 360
  Source counts = 54.0 +/- 16.2
  Background counts = 207.0
  Rate = 0.004 +/- 0.001
[Sat Jun  8 04:42:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 04:42:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 04:42:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 04:42:21 2013] Source does appear to be extended
[Sat Jun  8 04:42:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.40
[Sat Jun  8 04:42:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 04:42:39 2013] Initial guess for spatial extent in simple fitting = 5.90"
[Sat Jun  8 04:42:39 2013] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.162
[Sat Jun  8 04:42:39 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 5.90"
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17.csv
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17.csv
[Sat Jun  8 05:16:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun  8 05:16:45 2013] fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun  8 05:16:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun  8 05:16:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:47:26 2013] Spatial fit model total counts = 263.027000, observed total counts = 238.000000
[Sat Jun  8 05:47:26 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 05:47:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:47:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:47:26 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 05:47:26 2013] Source does appear to be extended
[Sat Jun  8 05:47:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.40
[Sat Jun  8 05:47:43 2013] XMMSAS src. selection expression = ellipse(19673.380400, 30462.351400, 367.990211, 339.507610, 359.984810, X, Y)
[Sat Jun  8 05:47:43 2013] Writing source region out to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  8 05:47:43 2013] Extracting stamp from image fullrun_pn_xmm0670390301_pi300-10000_cl_sm2.00.img.gz, (206, 330) - (248, 372)
[Sat Jun  8 05:47:43 2013] XMMSAS bgd. selection expression = annulus(19673.380400, 30462.351400, 613.317018, 1226.634035, X, Y) && !ellipse(18415.268021, 28668.875671, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 05:47:43 2013] Writing fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17.gif
[Sat Jun  8 06:01:21 2013] Mean detx,y = (2470.80, 8332.24) 
[Sat Jun  8 06:01:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 06:01:53 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 06:01:54 2013] Setting source spectrum file to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  8 06:01:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun  8 06:15:31 2013] Not generating rmf since there are only 53 counts
[Sat Jun  8 06:15:31 2013] rmf not generated due to insufficient counts
[Sat Jun  8 06:34:40 2013] Updating aperture counts using extracted products
[Sat Jun  8 06:34:40 2013] Total counts from fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 94.00
[Sat Jun  8 06:34:40 2013] Total counts from fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 268.00
[Sat Jun  8 06:34:40 2013] Got source and background scale factors 392000.000000, 2881761.000000
[Sat Jun  8 06:34:40 2013] User source parameters:
  Position = (226.7, 350.7) = 12 39 26.97 -16 5 18.5
  Extent = 6.1 (3.6-9.4)" x 5.7 (3.8-9.0)", rotation angle = 360
  Source aperture counts = 57.5 +/- 10.7
  Background aperture counts = 36.5
  Rate = 0.004 +/- 0.0007

[Sat Jun  8 06:34:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 06:34:43 2013] Using photon index=1.80, rate=0.00359, arf fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17.arf
[Sat Jun  8 06:34:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 06:34:43 2013] Updating source flux to 1.7e-14
[Sat Jun  8 06:34:50 2013] Flag p found in src. 17 procflags, skipping spectral fitting
[Sat Jun  8 06:34:50 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 06:34:52 2013] xmm0670390301/analysis//spectral/fullrun_pn_xmm0670390301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete