[Sat Jun  8 03:24:26 2013] Detection parameters:
  Position = (212.3, 330.2) = 12 39 31.32 -16 6 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 8.2
  Background counts = 5.5
  Rate = 0.003 +/- 0.0007

[Sat Jun  8 03:24:26 2013] Off-axis axis estimate = 6.66'
[Sat Jun  8 04:22:33 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 04:22:33 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Sat Jun  8 04:22:33 2013] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.963
[Sat Jun  8 04:22:33 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.76"
[Sat Jun  8 04:42:13 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun  8 04:42:14 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun  8 04:42:14 2013] Fit fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_src7 appears to have run properly
[Sat Jun  8 04:42:14 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun  8 04:42:14 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun  8 04:42:14 2013] Fit fullrun_mos2_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jun  8 04:42:28 2013] Spatial fit model total counts = 92.605400, observed total counts = 87.000000
[Sat Jun  8 04:42:28 2013] Offset between fit and detection position for source 5 = 0.082727 pixels
[Sat Jun  8 04:42:28 2013] 92.818900 total counts/ 64.432800 bgd. counts: snr = 3.536325
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.082727 pixels
  Position = (212.2, 330.2) = 12 39 31.34 -16 6 47.5
  Extent = 5.9 (4.2-9.4)", rotation angle = 0
  Source counts = 28.4 +/- 9.6
  Background counts = 64.4
  Rate = 0.002 +/- 0.0006
[Sat Jun  8 04:42:28 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 04:42:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 04:42:28 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 04:42:28 2013] Source does appear to be extended
[Sat Jun  8 04:42:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 05:31:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:31:40 2013] Initial guess for spatial extent in simple fitting = 5.93"
[Sat Jun  8 05:31:40 2013] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.152
[Sat Jun  8 05:31:40 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 5.93"
[Sat Jun  8 05:47:18 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun  8 05:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7.csv
[Sat Jun  8 05:47:18 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun  8 05:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7.csv
[Sat Jun  8 05:47:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:47:18 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun  8 05:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun  8 05:47:18 2013] fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun  8 05:47:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun  8 05:47:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 05:47:33 2013] Warning, spatial fit 7 centroid is now closest to src. 7
[Sat Jun  8 05:47:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:47:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:47:33 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 05:47:33 2013] Source does appear to be extended
[Sat Jun  8 05:47:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 06:25:57 2013] XMMSAS src. selection expression = ellipse(18412.198600, 28681.761200, 355.898410, 355.898410, 0.000000, X, Y)
[Sat Jun  8 06:25:57 2013] Writing source region out to fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun  8 06:25:57 2013] Extracting stamp from image fullrun_mos2_xmm0670390301_pi300-10000_cl_sm2.00.img.gz, (192, 310) - (233, 351)
[Sat Jun  8 06:25:57 2013] XMMSAS bgd. selection expression = annulus(18412.198600, 28681.761200, 593.164017, 1186.328034, X, Y) && !ellipse(17154.248581, 26867.634766, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 06:25:57 2013] Writing fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5.gif
[Sat Jun  8 06:27:55 2013] Mean detx,y = (-4316.93, -7407.12) 
[Sat Jun  8 06:27:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 06:28:10 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 06:28:10 2013] Setting source spectrum file to fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  8 06:28:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun  8 06:33:33 2013] Not generating rmf since there are only 28 counts
[Sat Jun  8 06:33:33 2013] rmf not generated due to insufficient counts
[Sat Jun  8 06:34:46 2013] Updating aperture counts using extracted products
[Sat Jun  8 06:34:46 2013] Total counts from fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 40.00
[Sat Jun  8 06:34:46 2013] Total counts from fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 60.00
[Sat Jun  8 06:34:46 2013] Got source and background scale factors 370220.000000, 2681193.000000
[Sat Jun  8 06:34:46 2013] User source parameters:
  Position = (212.2, 330.2) = 12 39 31.34 -16 6 47.5
  Extent = 5.9 (4.2-9.4)", rotation angle = 0
  Source aperture counts = 31.7 +/- 7.4
  Background aperture counts = 8.3
  Rate = 0.002 +/- 0.0004

[Sat Jun  8 06:34:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 06:34:47 2013] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5.arf
[Sat Jun  8 06:34:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 06:34:47 2013] Updating source flux to 2.9e-14
[Sat Jun  8 06:34:49 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 06:34:50 2013] xmm0670390301/analysis//spectral/fullrun_mos2_xmm0670390301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete