[Sat Jun  8 03:24:01 2013] Detection parameters:
  Position = (488.0, 310.2) = 12 38 8.08 -16 8 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.5 +/- 9.3
  Background counts = 4.2
  Rate = 0.003 +/- 0.0006

[Sat Jun  8 03:24:01 2013] Off-axis axis estimate = 13.77'
[Sat Jun  8 04:05:46 2013] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 04:05:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 04:05:46 2013] Initial guess for spatial extent in simple fitting = 13.31"
[Sat Jun  8 04:05:46 2013] source mask rpix=3.1, npix_max = 50, mask sum = 54, frac = 1.065
[Sat Jun  8 04:05:46 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.31"
[Sat Jun  8 04:22:33 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  8 04:22:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6.csv
[Sat Jun  8 04:22:33 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  8 04:22:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6.csv
[Sat Jun  8 04:22:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 04:22:33 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  8 04:22:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  8 04:22:33 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  8 04:22:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  8 04:22:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0670390301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 04:42:24 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 16.791555 pixels away
[Sat Jun  8 04:42:24 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 04:42:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 04:42:24 2013] Assessing source extent using major
[Sat Jun  8 04:42:24 2013] Source does appear to be extended
[Sat Jun  8 04:42:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 05:16:46 2013] Using EEF radius (= 13.31 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 05:16:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 05:16:46 2013] Initial guess for spatial extent in simple fitting = 13.31"
[Sat Jun  8 05:16:46 2013] source mask rpix=3.1, npix_max = 50, mask sum = 54, frac = 1.065
[Sat Jun  8 05:16:46 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.31"
[Sat Jun  8 05:31:40 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun  8 05:31:40 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun  8 05:31:40 2013] Fit fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Jun  8 05:31:40 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun  8 05:31:40 2013] fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun  8 05:31:40 2013] Fit fullrun_mos1_xmm0670390301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun  8 05:47:29 2013] Spatial fit model total counts = 125.624000, observed total counts = 117.000000
[Sat Jun  8 05:47:29 2013] Offset between fit and detection position for source 7 = 0.386354 pixels
[Sat Jun  8 05:47:29 2013] 123.266500 total counts/ 82.604200 bgd. counts: snr = 4.473947
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.386354 pixels
  Position = (487.6, 310.0) = 12 38 8.19 -16 8 15.0
  Extent = 8.7 (6.0-12.2)", rotation angle = 92 (81-108) degrees
  Source counts = 40.7 +/- 11.1
  Background counts = 82.6
  Rate = 0.002 +/- 0.0007
[Sat Jun  8 05:47:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 05:47:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 05:47:29 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 05:47:29 2013] Source does appear to be extended
[Sat Jun  8 05:47:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.79
[Sat Jun  8 05:47:29 2013] Source is asymmetric
[Sat Jun  8 06:16:59 2013] XMMSAS src. selection expression = ellipse(42376.286340, 26924.937400, 520.888215, 199.696806, 91.557379, X, Y)
[Sat Jun  8 06:16:59 2013] Writing source region out to fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_src.reg
[Sat Jun  8 06:16:59 2013] Extracting stamp from image fullrun_mos1_xmm0670390301_pi300-10000_cl_sm2.00.img.gz, (458, 280) - (518, 340)
[Sat Jun  8 06:16:59 2013] XMMSAS bgd. selection expression = annulus(42376.286340, 26924.937400, 868.147025, 1736.294050, X, Y)
[Sat Jun  8 06:16:59 2013] Writing fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7.gif
[Sat Jun  8 06:19:13 2013] Mean detx,y = (5019.37, -16544.48) 
[Sat Jun  8 06:19:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 06:19:28 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 06:19:28 2013] Setting source spectrum file to fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jun  8 06:19:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jun  8 06:25:25 2013] Not generating rmf since there are only 40 counts
[Sat Jun  8 06:25:25 2013] rmf not generated due to insufficient counts
[Sat Jun  8 06:34:44 2013] Updating aperture counts using extracted products
[Sat Jun  8 06:34:44 2013] Total counts from fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 52.00
[Sat Jun  8 06:34:44 2013] Total counts from fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 121.00
[Sat Jun  8 06:34:44 2013] Got source and background scale factors 332800.000000, 3813118.000000
[Sat Jun  8 06:34:44 2013] User source parameters:
  Position = (487.6, 310.0) = 12 38 8.19 -16 8 15.0
  Extent = 8.7 (6.0-12.2)", rotation angle = 92 (81-108) degrees
  Source aperture counts = 41.4 +/- 8.3
  Background aperture counts = 10.6
  Rate = 0.002 +/- 0.0005

[Sat Jun  8 06:34:45 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 06:34:45 2013] Using photon index=1.80, rate=0.00245, arf fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7.arf
[Sat Jun  8 06:34:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 06:34:45 2013] Updating source flux to 1.3e-13
[Sat Jun  8 06:34:48 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 06:34:49 2013] xmm0670390301/analysis//spectral/fullrun_mos1_xmm0670390301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete